[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

karo2204
SamyGO Project Donor
Posts: 137
Joined: Fri Feb 07, 2014 10:09 am
Location: M?nchen
Contact:

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by karo2204 »

Hi Lordbyte,

thanks for your answer. I have changed my membership to "Donor" and I will see what happens next. I send Bugficks some DMs but I didn't get an answer :(

Hope it works and I can see this thread. I hope I will get some answer there.... I am really stuck.

Karolin
Samsung TV: UE46F6500
Website: http://www.karolin-bierbrauer.de

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by Lordbyte »

I am sure you will get your problem solved ..
Please notice that all research regarding the F-series is still very much in progress.
Almost daily new details surface here on the board, and many very skilled members
publish information that might bring a solution ... be patient, and keep researching :-)
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

Jopardy
SamyGO Project Donor
Posts: 49
Joined: Sat Feb 01, 2014 4:54 pm
Location: Turkiye

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by Jopardy »

I did new fireware my UE55F7000 - v1115.0

and after no problem old root. it worked. (worked old root. not new root)

and samygo start and work direct.

Anarchy
Posts: 8
Joined: Tue Jan 14, 2014 7:39 am

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by Anarchy »

FEATURE (AND BUG?)
-----------------------------
Hi,
i have some problems with decoding and saved movie files.

Decoding fails sometimes without an for me understood reason.
When i start a mass decoding its always that about 1 of 5-10 decoding failed.

Now here i have a problem: I need to check all my files decoded correctly to find the one's which not decoded correctly... i didnt test it completly: But i think it also deletes the file if checked "delete after decode" if it didnt decode and saved correctly :(

So i have 2 feature wishes:
1) Feature to "synchronize" the files in my "output folder for .ts files" and the files on the TV.
Highlight already found files in output folder as "already decoded".
This could be done by two simple possibilitys:
a) check the filename by your output-name configuration
b) check metadata if you also exported the metadata files for movies.
This feature could be activated in settings or by an active button to sync once.
2) If checked "delete after decoding" please recheck for a 100% check if the just decoded file exists on "output folder for .ts files" -> if not, dont delete (i dont know if a check like this is already implemented - but i fear not?)

Thanks!

zoelechat
Official SamyGO Developer
Posts: 8445
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by zoelechat »

Anarchy wrote:a) check the filename by your output-name configuration
We already thought of this but it's not possible to sync to output filenames. For example if you use a simple filemask such as "<title>.ts" and you have multiple instances of this title, output will be title..title(1)..title(2)... How will you differentiate them, especially if you emptied output folder, output will start at (1) again. Same filename can correspond to different recordings and conversely. More, nobody is supposed to use 'fixed' filemask...
b) check metadata if you also exported the metadata files for movies.
Who uses metadata? :)
2) If checked "delete after decoding" please recheck for a 100% check if the just decoded file exists on "output folder for .ts files" -> if not, dont delete (i dont know if a check like this is already implemented - but i fear not?)
-If a file/name already exists, app will ask to overwrite or not
-If decoding fails, incomplete destination file is removed, source file is NOT, even if "delete after decode" is checked
-you can try without fear ;)
I do NOT receive any PM. Please use forum.

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by Lordbyte »

Anarchy wrote:FEATURE (AND BUG?)
-----------------------------
Hi,
i have some problems with decoding and saved movie files.

Decoding fails sometimes without an for me understood reason.
When i start a mass decoding its always that about 1 of 5-10 decoding failed.
Zoelechat answered your questions mostly like I would have too.

I am also interested in why the decoding fails ..
Does it fail during the retrieval of the .srt file, or does it fail during the actual decryption ?
Is there a pattern .. Can you make it fail again and again at the same spot .. Can you replicate problem using same files twice (or more) ?
Are you using WiFi or LAN-cable ?
Does any error show .. Anything in log ?

Can you tell me anything that would allow me to replicate bug .. so I can fix it ?
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

karo2204
SamyGO Project Donor
Posts: 137
Joined: Fri Feb 07, 2014 10:09 am
Location: M?nchen
Contact:

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by karo2204 »

Lordbyte wrote:I am sure you will get your problem solved ..
Please notice that all research regarding the F-series is still very much in progress.
Almost daily new details surface here on the board, and many very skilled members
publish information that might bring a solution ... be patient, and keep researching :-)

had some mistakes in setup. Reset the whole TV and did everything from the start. All works now.
Last edited by karo2204 on Wed Mar 26, 2014 3:26 pm, edited 1 time in total.
Samsung TV: UE46F6500
Website: http://www.karolin-bierbrauer.de

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by Lordbyte »

@Karo2204,

Please update your tutorial, and please be very specific in your description of your solution.
You are now in a position to save a lot of time and research for other members, both existing ones,
and ones that are yet to join the ranks af Samsung F-series owners.

Notice that "good looking" is NOT a parameter when it comes to system-files .. I do believe I would leave the .dis files alone,
as they are used to explicitly disable certain features .. If you remove (move) them, you may experience problems not forseen.
At the very least I would have juuso comment on your plans before actually carrying it out. Better safe than sorry :-)

Again, congratulations on your quite huge progress !

And please please do remember to document your entire understanding af this issue as it is now, and publish it in the relevant thread.
I would personally enjoy following a (your) COMPLETE tutorial for recording directly to my Synology NAS :-)

Thanks in advance.
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

karo2204
SamyGO Project Donor
Posts: 137
Joined: Fri Feb 07, 2014 10:09 am
Location: M?nchen
Contact:

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by karo2204 »

i will update it again and I will write a complete tutorial.
Samsung TV: UE46F6500
Website: http://www.karolin-bierbrauer.de

karo2204
SamyGO Project Donor
Posts: 137
Joined: Fri Feb 07, 2014 10:09 am
Location: M?nchen
Contact:

Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4

Post by karo2204 »

OK I installed my TV completely new today and everything is working now. Even the NFS mount automatically mounts now on boot.

But another thing. How can the files recorded on NFS have the same name like the files on HDD?

Also I read something in the config file about ts2mkv. How does this work?
Samsung TV: UE46F6500
Website: http://www.karolin-bierbrauer.de

Post Reply

Return to “[F] Software”