Page 22 of 25

Re: [App] libSoftPowerOff D/E/F/H

Posted: Sat May 28, 2016 4:58 pm
by BorisAU
Hello
Library works on f8000 2013.

But when the TV is turned off it does not turn off a connected av receiver yamaha for hdmi.
I would like to off the TV during the software sends a signal to external devices on a real trip for hdmi, just as it does in the ordinary trip.
Maybe you need to add any additional options for the soft off or prescribe special commands in cmd_on and cmd_off ??
There is a possibility ??

Re: [App] libSoftPowerOff D/E/F/H

Posted: Sat May 28, 2016 5:45 pm
by zoelechat
Either you know network access to your AV receiver and it's up to you to find the right CMDs, or it's simply not possible if receiver expects no more signal/current from HDMI to power off itself. Soft-off is not real off, you have to consider it only as "panel and speaker mute" (actually that's exactly what it does...)

Re: [App] libSoftPowerOff D/E/F/H

Posted: Mon Jul 25, 2016 11:34 am
by WulkanOS
Hi
Isi it possible, when I install patch: run tv players mp3 or run tv app radio, turn off panel but sound hear in externar source via spdif ?
My tv 40F6320

Re: [App] libSoftPowerOff D/E/F/H

Posted: Mon Jul 25, 2016 8:11 pm
by notengo13
WulkanOS wrote:Hi
Isi it possible, when I install patch: run tv players mp3 or run tv app radio, turn off panel but sound hear in externar source via spdif ?
My tv 40F6320
In H series there is a option to turn off panel in tools. Maybe in F you have got the same options

Re: [App] libSoftPowerOff D/E/F/H

Posted: Tue Jul 26, 2016 8:20 am
by WulkanOS
notengo13 wrote:
WulkanOS wrote:Hi
Isi it possible, when I install patch: run tv players mp3 or run tv app radio, turn off panel but sound hear in externar source via spdif ?
My tv 40F6320
In H series there is a option to turn off panel in tools. Maybe in F you have got the same options
Yes, option it but not when played movies, music from usb, dlna or when tv in open smarthub.

Re: [App] libSoftPowerOff D/E/F/H

Posted: Fri Jul 29, 2016 1:24 pm
by mad_ady
It might be nice to activate that option in all screens under Tools, if possible. Maybe libPanelOff.

Re: [App] libSoftPowerOff D/E/F/H

Posted: Fri Jul 29, 2016 1:48 pm
by zoelechat
Map KEY_ESAVING somewhere, option is greyed in menu when in media player, but usable from RC :)

Re: [App] libSoftPowerOff D/E/F/H

Posted: Fri Jul 29, 2016 1:58 pm
by mad_ady
Nice :) Can I remap it on top of E-Manual? I think it's the most useless key on the remote...

Re: [App] libSoftPowerOff D/E/F/H

Posted: Fri Jul 29, 2016 2:12 pm
by zoelechat
Yes :)

Code: Select all

"KEY_TOPMENU": "KEY_ESAVING"
(KEY_TOPMENU should be E-Manual)

Re: [App] libSoftPowerOff D/E/F/H

Posted: Thu Oct 20, 2016 8:50 am
by mad_ady
@zoelechat: Is there a way of using your library and powering off the TV instead of going to soft power off when pressing power based on code executed in CMD_OFF?
For example, the CMD_OFF script can check an external condition and if the condition is true it should put the TV to power off (requiring a complete power on next time)?

Should I be injecting Source + Power from the remote via shell to do this, or would it affect the normal functionality (e.g. call the library again and cause a loop)?

Also, I suspect CMD_OFF is executed just before powering off? For example I can display an informational popup on screen with a sleep of 2s to show relevant information?

Edit: Actually, It would be acceptable if the TV went to soft power off, but how can I ensure that on the next power on it does a full power on? I'm guessing I should write something in a file on power off, and read it with the CMD_ON script. If the condition is true, run a "micom reset" command and that would do it. Is there a better way of doing it?