Page 25 of 26
Re: [App] libSoftPowerOff D/E/F/H
Posted: Sun Jun 18, 2017 1:30 pm
by zoelechat
In that lib, not as far as I remember... Otherwise I'm sure libChanList reports it (you can use NOLIST arg to not parse channels uselessly everytime):
Code: Select all
[ChanList] SamyGO D/E/F/H libChanList v0.2.2 - (c) zoelechat 2015
[ChanList] lib_init, >>>
[ChanList] TV mode: 0 Air (Soft-Off)
[ChanList] Current channel: 2 France 2
[...]
Re: [App] libSoftPowerOff D/E/F/H
Posted: Sun Jun 18, 2017 2:12 pm
by mad_ady
I'm worried about using chanlist, because (as far as I know) it needs to inject a library each time and this increases the risk of an osd crash. Have you noticed such problems with repeated use, or is it all in my head?
Re: [App] libSoftPowerOff D/E/F/H
Posted: Sun Jun 18, 2017 2:28 pm
by zoelechat
Not especially
Not sure it would be 100% reliable (e.g: PVR and other "not using power button" cases), but you could also setup some dummy (even unexisting) CMD_ON/CMD_OFF then check in log which one was "launched" as latest:
Code: Select all
[SoftPowerOff] Launching CMD_OFF: ...
[...]
[SoftPowerOff] Launching CMD_ON: ...
Re: [App] libSoftPowerOff D/E/F/H
Posted: Mon Feb 11, 2019 12:54 pm
by miras_mi
It works perfectly with oscam. Instant descrambling when tv "wakes up", no more need to wait about 3 mins each time. But LED panel connected to usb it is still lighting. Is there any option/command to disable the usb power with SoftPowerOff (H model)?
Re: [App] libSoftPowerOff D/E/F/H
Posted: Mon Feb 11, 2019 5:18 pm
by zoelechat
Nope. If you disable USB you break mounts therefore root, that's the main and essential difference vs built-in instant on.
Re: [App] libSoftPowerOff D/E/F/H
Posted: Thu Aug 29, 2019 5:44 pm
by Riquet065
Thank you for this lib, works good!
Re: [App] libSoftPowerOff D/E/F/H
Posted: Fri Aug 30, 2019 7:52 am
by miazza
miras_mi wrote: ↑Mon Feb 11, 2019 12:54 pm
It works perfectly with oscam. Instant descrambling when tv "wakes up", no more need to wait about 3 mins each time. But LED panel connected to usb it is still lighting. Is there any option/command to disable the usb power with SoftPowerOff (H model)?
Please remember that the TV in this condition is not OFF: it is maily the monitor to be OFF while the CPU is still running and consuming power.
Furthermore, OSCAM is always connected and running so consider to disable the oscan lib logging that can increase considerably and induce some issue on the TV (reboot ... no remote control ... etc...).
Re: [App] libSoftPowerOff D/E/F/H
Posted: Sun Sep 01, 2019 9:20 am
by Riquet065
miazza wrote: ↑Fri Aug 30, 2019 7:52 am
miras_mi wrote: ↑Mon Feb 11, 2019 12:54 pm
It works perfectly with oscam. Instant descrambling when tv "wakes up", no more need to wait about 3 mins each time. But LED panel connected to usb it is still lighting. Is there any option/command to disable the usb power with SoftPowerOff (H model)?
Please remember that the TV in this condition is not OFF: it is maily the monitor to be OFF while the CPU is still running and consuming power...
Personally i only use it to record with oscam, if i don't record i do a deep Power Off and stop all consuming power with a button between the wall and the tv, the sat decoder, the dvd reader and all device
.
Re: [App] libSoftPowerOff D/E/F/H
Posted: Mon Sep 02, 2019 8:38 am
by miazza
Riquet065 wrote: ↑Sun Sep 01, 2019 9:20 am
...if i don't record i do a deep Power Off and stop all consuming power with a button between the wall and the tv, the sat decoder, the dvd reader and all device
.
I do the same
Re: [App] libSoftPowerOff D/E/F/H
Posted: Sun Dec 26, 2021 11:41 am
by setti
Is it possible to keep HDMI Inputs & arc alive when going soft off? I have a soundbar connected via hdmi arc and a nuc running kodi connected to tv hdmi.
Something like hdmi passthrough in standby would be great, without having a full blown avr.