[App] libPIPonTV E/F

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libPIPonTV E/F

Post by zoelechat »

Nope.
I do NOT receive any PM. Please use forum.
ZGod
Posts: 82
Joined: Sat Mar 21, 2015 7:46 pm

Re: [App] libPIPonTV E/F

Post by ZGod »

Thanks for the quick response! Too bad, would have been cool.
ZGod
Posts: 82
Joined: Sat Mar 21, 2015 7:46 pm

Re: [App] libPIPonTV E/F

Post by ZGod »

I just noticed it's possible to get the HDMI input inside the PIP of the web browser on H-series. At least something :)
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libPIPonTV E/F

Post by zoelechat »

Web browser is not a source, therefore it's not PIP but just resize of main :)
I do NOT receive any PM. Please use forum.
ZGod
Posts: 82
Joined: Sat Mar 21, 2015 7:46 pm

Re: [App] libPIPonTV E/F

Post by ZGod »

Ah I see :) That must be the same trick used on the smarthub screen. I still hope there could be a way to get at least one of the inputs in PIP sometime (if not HDMI)!
apoklyps3
Posts: 46
Joined: Fri Nov 15, 2013 11:06 am

Re: [App] libPIPonTV E/F

Post by apoklyps3 »

any way to fully fix the greenish blurry image on hdmi input(hdmi4 renamed to PC)?
if my PC goes into screen saver when it comes back the image is blurry and has a greenish tint. turning off/on will temporarily fix it.
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libPIPonTV E/F

Post by zoelechat »

apoklyps3 wrote: Sat Oct 10, 2020 7:29 am any way to fully fix the greenish blurry image on hdmi input(hdmi4 renamed to PC)?
if my PC goes into screen saver when it comes back the image is blurry and has a greenish tint. turning off/on will temporarily fix it.
Never heard, but I guess PIP of no signal is -understandably- not expected and cause some loss of sync. I doubt any solution. You still can use blank screen instead of screen off as screensaver, to keep signal alive.
I do NOT receive any PM. Please use forum.
apoklyps3
Posts: 46
Joined: Fri Nov 15, 2013 11:06 am

Re: [App] libPIPonTV E/F

Post by apoklyps3 »

It's not happening when I use PIP, just if lib is loaded is enough. I added moresize wich is noted to cause issues on some tvs. will try witouth it and get back.
networkfusion3
Posts: 3
Joined: Thu Apr 08, 2021 6:05 pm

Re: [App] libPIPonTV E/F

Post by networkfusion3 »

Hi, I am trying to use this lib to get more PIP sizes, but I am not able to see the menu to do so (With TV as the primary input and pressing "Tools" on the pilot/remote) and only displays an option for PIP to be on or off...

My TV is a UE75F6400, and after looking at the HideSource log:

Code: Select all

[HideSource] HDMI1:	57
[HideSource] HDMI2:	58
[HideSource] HDMI3:	59
[HideSource] HDMI4/DVI:	60
The command I am running is:

Code: Select all

samyGOso -d -T -B -r -l /mnt/opt/privateer/usr/libso/libPIPonTV.so SOURCE:57,58,59,60 MORESIZE
With a log of:

Code: Select all

[PIPonTV] SamyGO E/F libPIPonTV v0.1.9 - (c) zoelechat 2016
[PIPonTV] dlsym 'g_pAppWindow' failed.
[PIPonTV] dlsym 'g_pAppWindowPIP' failed.
[PIPonTV] dlsym 'g_pAppTV' failed.
[PIPonTV] _ZN5TCAPI5GetTvEv [0xab4994].
[PIPonTV] dlsym '_ZN8TCWindow9SetSourceEii' failed.
[PIPonTV] dlsym '_ZN8TCWindow9GetSourceEPii' failed.
[PIPonTV] _ZN5TCAPI9GetWindowEN8TCWindow7EWindowE [0xab49b4].
[PIPonTV] _ZN12TCWindowImpl9SetSourceEii [0xbcc648].
[PIPonTV] _ZN12TCWindowImpl9GetSourceEPii [0xbc7338].
[PIPonTV] _ZN6PCTime4TickEv [0xa91fb0].
[PIPonTV] dlsym '_ZN4TCTv6SetPIPEii' failed.
[PIPonTV] _ZN8TCTvImpl6SetPIPEiiN4TCTv10EPipZOrderE [0xbc1274].
[PIPonTV] dlsym 'g_pTaskManager' failed.
[PIPonTV] dlsym '_ZN12CTaskManager14GetApplicationE15DTV_APPLICATION' failed.
[PIPonTV] dlsym '_ZN10CViewerApp16GetViewerManagerEv' failed.
[PIPonTV] dlsym '_ZN14CViewerManager7ShowPIPEi' failed.
[PIPonTV] dlsym '_ZN14CViewerManager7ShowPIPEb' failed.
[PIPonTV] dlsym 'g_pAppSpeaker' failed.
[PIPonTV] dlsym '_ZN9TCSpeaker9SetWindowEii' failed.
[PIPonTV] dlsym '_ZN9TCSpeaker9GetWindowEPii' failed.
[PIPonTV] _ZN5TCAPI10GetSpeakerEN9TCSpeaker8ESpeakerE [0xab4984].
[PIPonTV] _ZN13TCSpeakerImpl9SetWindowEii [0xbaf32c].
[PIPonTV] _ZN13TCSpeakerImpl9GetWindowEPii [0xbaf780].
[PIPonTV] _ZN16TCPIPSizeChecker5t_GetEPii [0x1478578].
[PIPonTV] _ZTV16TCPIPSizeChecker [0x1ed1860].
[PIPonTV] _ZN11SizeControl19CheckPIPSizeSupportEN9TPCWindow9ERectSizeE [0x95c10c].
[PIPonTV] lib_init, >>>
[PIPonTV] Enabling PIP in TV mode for source: 57
[PIPonTV] Enabling PIP in TV mode for source: 58
[PIPonTV] Enabling PIP in TV mode for source: 59
[PIPonTV] Enabling PIP in TV mode for source: 60
[PIPonTV] dlsym '_ZN4TCTv16m_GetPIPOnSourceEv' failed.
[PIPonTV] _ZN8TCTvImpl16m_GetPIPOnSourceEv [0xbb4a9c].
[PIPonTV] dlsym '_ZN4TCTv6SetPIPEii' failed.
[PIPonTV] _ZN8TCTvImpl6SetPIPEiiN4TCTv10EPipZOrderE [0xbc1274].
[PIPonTV] _ZN12KeyInputBase17t_ProcessKeyValueEPh [0x9afc08].
[PIPonTV] _ZN10SsInfoBase11GetSourceIdEN9TPCWindow7EWindowE [0x90c328].
[PIPonTV] _ZN8SsTvBase18CheckWindowConnectEN9TPCSource7ESourceEN9TPCWindow7EWindowEPjPKS1_ [0x9007cc].
[PIPonTV] _ZN20TCHALInfoCheckerBase5CheckEi [0xcccfdc].
[PIPonTV] _ZN20TCHALInfoCheckerBase3GetEPii [0xccd0f0].
[PIPonTV] dlsym '_ZNK26CPipAntennaSublistDataItem15AddMenuItemFlagEv' failed.
[PIPonTV] Init done...
[PIPonTV] Already injected resident, exiting...
I am wondering if I am doing anything wrong.

Also of note, is the pilot/remote I am using doesnt have a 3D button, so might have to find a way to map the sound selection to a different button in future, but I can switch to the correct source fine using the FF and RW buttons.

Edit: I have found that I can change the location of the PIP position using "Menu -> Picture -> PIP (enter)" but the extra MORESize options dont exist, and the sound selection is greyed out. I am still hoping for proper split screen...

Post Reply

Return to “[F] Software”