change region

[diegogalletti]

I can confirm the same problem, it seems like the new firmware does not allow the local_set change even after uring RuSamsumgTvCommunicator (Factory, 3Speed). I'm not sure if there is a different way to do it, otherwise I would think a software downgrade is the only solution, assuming that is still possible. Anybody ?

[bugficks]

reading must be hard...
you need to build IR transmitter, see wiki

[diegogalletti]

I tried the IR method and after sending the Factory+3Speed codes the TV starts showing a WHITE,RED,GREEN,BLUE colors without accepting further IR commands from the remote. There is also now way to see anything else other than the colors. I can still listen the channel sound in the background. If I use the joystick on the back of the TV, it will go straight back to the TV channel I was watching. I'm on firmware 1110. Any idea of what I'm doing wrong ?

[poggio61]

in the service menu is "factory reset" using what you go back to the factory defaults, including the 1107 fw?

[diegogalletti]

No, factory reset will not downgrade the firmware back, only the setttings will be restored.

[poggio61]

So I understand that there is no solution to our problem .

[juusso]

Weird, but no at the moment. I believe we miss something, IR method should work, but it won`t.

[diegogalletti]

The IR transmitter is supposed to work but I suspect Samsung changed something in the new firmware 1110. I have been trying the IR method many times, I can send the factory+3speed codes but no luck enabling the Local Set option. The best I can get is the solid white,red,green,blue images cycling... I really hope somebody from this forum can help us out at this point.

[juusso]

1.what about this procedure:

• TV is on and fully started.
  Send Info + Factory trough IR diodes.

2.If no extended factory menu, then power off to stand by. Go to service menu and send Info+Factory

3. If still no success - send twice 3Speed

[klarya]

why don't you use the correct code for service menue?
i also have an ue55f6500.

use normal remote, that comes with tv.

turn off tv

press info -> menu -> mute -> power on tv

then under option is a point locat set

mine is eu_ger