change region

Here is information about customize your F series firmware.

diegogalletti
Posts: 7
Joined: Thu Sep 12, 2013 8:49 am

Re: change region

Post by diegogalletti »

I can confirm the same problem, it seems like the new firmware does not allow the local_set change even after uring RuSamsumgTvCommunicator (Factory, 3Speed). I'm not sure if there is a different way to do it, otherwise I would think a software downgrade is the only solution, assuming that is still possible. Anybody ?

User avatar
bugficks
Official SamyGO Developer
Posts: 1062
Joined: Tue Jun 25, 2013 3:56 pm

Re: change region

Post by bugficks »

reading must be hard...
you need to build IR transmitter, see wiki

diegogalletti
Posts: 7
Joined: Thu Sep 12, 2013 8:49 am

Re: change region

Post by diegogalletti »

I tried the IR method and after sending the Factory+3Speed codes the TV starts showing a WHITE,RED,GREEN,BLUE colors without accepting further IR commands from the remote. There is also now way to see anything else other than the colors. I can still listen the channel sound in the background. If I use the joystick on the back of the TV, it will go straight back to the TV channel I was watching. I'm on firmware 1110. Any idea of what I'm doing wrong ?

poggio61
Posts: 8
Joined: Mon Sep 09, 2013 10:01 pm

Re: change region

Post by poggio61 »

in the service menu is "factory reset" using what you go back to the factory defaults, including the 1107 fw?

diegogalletti
Posts: 7
Joined: Thu Sep 12, 2013 8:49 am

Re: change region

Post by diegogalletti »

No, factory reset will not downgrade the firmware back, only the setttings will be restored.

poggio61
Posts: 8
Joined: Mon Sep 09, 2013 10:01 pm

Re: change region

Post by poggio61 »

So I understand that there is no solution to our problem .

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: change region

Post by juusso »

Weird, but no at the moment. I believe we miss something, IR method should work, but it won`t.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

diegogalletti
Posts: 7
Joined: Thu Sep 12, 2013 8:49 am

Re: change region

Post by diegogalletti »

The IR transmitter is supposed to work but I suspect Samsung changed something in the new firmware 1110. I have been trying the IR method many times, I can send the factory+3speed codes but no luck enabling the Local Set option. The best I can get is the solid white,red,green,blue images cycling... I really hope somebody from this forum can help us out at this point.

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: change region

Post by juusso »

1.what about this procedure:
  • TV is on and fully started.
    Send Info + Factory trough IR diodes.
2.If no extended factory menu, then power off to stand by. Go to service menu and send Info+Factory

3. If still no success - send twice 3Speed
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

klarya
Posts: 58
Joined: Thu Aug 15, 2013 6:48 pm

Re: change region

Post by klarya »

why don't you use the correct code for service menue?
i also have an ue55f6500.

use normal remote, that comes with tv.

turn off tv

press info -> menu -> mute -> power on tv

then under option is a point locat set

mine is eu_ger
UE55F6500updated FW 1116.0 rooted with working latest Testbuild SamyGo Extensions

Post Reply

Return to “[F] Firmware”