Hi @ all
I just build a Multifeed Satellite Dish. Everything works like a charm. But I have Problems with NasaTV HD. It is stuttering and I have Artefacts. When I use a external Receiver not the built-in receiver it works. As soon I use the built-in Receiver form my Television I have this Problem. I have a F6400 bought in Germany.
Thanks
Problems with NasaTV HD
-
- SamyGO Project Donor
- Posts: 10
- Joined: Fri Sep 05, 2014 4:15 pm
Re: Problems with NasaTV HD
Bad signal, no more. Some tuners can be a bit sensitive at bandwidth extremities (there 10727Mhz is very low). I personnally have to use a signal... attenuator! to reach such frequencies on one of my Samsung's.
edit: obviously you're not talking about Nasa 4K, then bad signal... at all
edit: obviously you're not talking about Nasa 4K, then bad signal... at all
I do NOT receive any PM. Please use forum.
-
- SamyGO Project Donor
- Posts: 10
- Joined: Fri Sep 05, 2014 4:15 pm
Re: Problems with NasaTV HD
Thats what I thought but why are all other Channels on the same frequency perfect. I thought its because the have a 60fps Framerate and the TV tuner can't handle it.
I mean the NASA TV HD on Hotbird 11.373 MHz
I mean the NASA TV HD on Hotbird 11.373 MHz
Last edited by Daddycool99 on Sun Mar 29, 2020 1:02 pm, edited 1 time in total.
Re: Problems with NasaTV HD
Well 60fps means more bitrate=more errors possible
I do NOT receive any PM. Please use forum.
-
- SamyGO Project Donor
- Posts: 10
- Joined: Fri Sep 05, 2014 4:15 pm
Re: Problems with NasaTV HD
OK thanks for the answer I will try it out
-
- SamyGO Project Donor
- Posts: 10
- Joined: Fri Sep 05, 2014 4:15 pm
Re: Problems with NasaTV HD
This is my Signalinformation
Frequency 11373MHz
Service ID 01f8
Multiplex (TSID 0384, ONID 01)
Network (ID ffff)
Bit Error Level 567
Signal Strength 70
Signal Quality 73
Frequency 11373MHz
Service ID 01f8
Multiplex (TSID 0384, ONID 01)
Network (ID ffff)
Bit Error Level 567
Signal Strength 70
Signal Quality 73
-
- SamyGO Project Donor
- Posts: 10
- Joined: Fri Sep 05, 2014 4:15 pm
Re: Problems with NasaTV HD
So I tried a signal attenuator with no success. Then I connected the TV straight to the LNB but no success. I think the TV can't handle the TV Signal at all.