Page 1 of 1

Problems with NasaTV HD

Posted: Sun Mar 29, 2020 10:21 am
by Daddycool99
Hi @ all

I just build a Multifeed Satellite Dish. Everything works like a charm. But I have Problems with NasaTV HD. It is stuttering and I have Artefacts. When I use a external Receiver not the built-in receiver it works. As soon I use the built-in Receiver form my Television I have this Problem. I have a F6400 bought in Germany.

Thanks

Re: Problems with NasaTV HD

Posted: Sun Mar 29, 2020 12:31 pm
by zoelechat
Bad signal, no more. Some tuners can be a bit sensitive at bandwidth extremities (there 10727Mhz is very low). I personnally have to use a signal... attenuator! to reach such frequencies on one of my Samsung's.

edit: obviously you're not talking about Nasa 4K, then bad signal... at all :mrgreen:

Re: Problems with NasaTV HD

Posted: Sun Mar 29, 2020 12:36 pm
by Daddycool99
Thats what I thought but why are all other Channels on the same frequency perfect. I thought its because the have a 60fps Framerate and the TV tuner can't handle it.

I mean the NASA TV HD on Hotbird 11.373 MHz

Re: Problems with NasaTV HD

Posted: Sun Mar 29, 2020 12:53 pm
by zoelechat
Well 60fps means more bitrate=more errors possible :)

Re: Problems with NasaTV HD

Posted: Sun Mar 29, 2020 12:58 pm
by Daddycool99
OK thanks for the answer I will try it out

Re: Problems with NasaTV HD

Posted: Sun Mar 29, 2020 1:15 pm
by Daddycool99
This is my Signalinformation

Frequency 11373MHz
Service ID 01f8
Multiplex (TSID 0384, ONID 01)
Network (ID ffff)
Bit Error Level 567
Signal Strength 70
Signal Quality 73

Re: Problems with NasaTV HD

Posted: Wed Apr 01, 2020 12:53 pm
by Daddycool99
So I tried a signal attenuator with no success. Then I connected the TV straight to the LNB but no success. I think the TV can't handle the TV Signal at all.