22F5400 - SH always in update.

Here for general support for F series TVs, request and problem solve area.

miazza
SamyGO Project Donor
Posts: 752
Joined: Wed Apr 03, 2013 6:10 pm

22F5400 - SH always in update.

Post by miazza »

Hi all,
since some months I'm experiencing this very annoying situation and SH is not usable.

The only app that starts is Internet browser but is restarts continuously when trying to loag the BING home page.

I have tried factory reste few time also from extended menu but no results.
I tried to load FW 0000 but the upgrade fails at 28%.

I tried several reset of SH and us of different DNS and even different ISP via mobile ISP.

Root Samygo widget is not anymore available and SH is completely empty (with the exception of the Internet app).

Do someone have any suggestion ?

May be I can format RWCommon area in some way ?

I do not have root anumore and account Samsung is grayed (not available).

Thanks
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

miazza
SamyGO Project Donor
Posts: 752
Joined: Wed Apr 03, 2013 6:10 pm

Re: 22F5400 - SH always in update.

Post by miazza »

Now i managed to have root again but only FTP is working.
I need help please.

Possibly I have to delete something for create free memory.
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

miazza
SamyGO Project Donor
Posts: 752
Joined: Wed Apr 03, 2013 6:10 pm

Re: 22F5400 - SH always in update.

Post by miazza »

I have found an EEPROM Reset option in the Service Menu.
What will happen if I push it ?

Shall I make a pic of the service menu as it is now ?
Will it help for this Smart Hub issue ?

This forum seems dead sins some time. It was so helpfull in the past ....
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

sectroyer
Official SamyGO Developer
Posts: 5954
Joined: Wed May 04, 2011 5:10 pm

Re: 22F5400 - SH always in update.

Post by sectroyer »

Your TV is probably dying :) So not much advice, better switch to something else :) You could also try changing the board, for such old tv it should be pretty cheap :) I changed my E for something like 10 or 20 euro. No point fixing something so cheap :lol:
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

miazza
SamyGO Project Donor
Posts: 752
Joined: Wed Apr 03, 2013 6:10 pm

Re: 22F5400 - SH always in update.

Post by miazza »

sectroyer wrote:
Tue Sep 29, 2020 4:35 pm
Your TV is probably dying :) So not much advice, better switch to something else :) You could also try changing the board, for such old tv it should be pretty cheap :) I changed my E for something like 10 or 20 euro. No point fixing something so cheap :lol:
Well , probably you are right but:
- first I cannot find a new motherboard for this model
- second I believe it is a SW issue amd not HW

Then U know , It is also matter of principle :)

What happens if I rename PartitionSwitch_0_0 in PartitionSwitch_1_0 ? Will the TV reboot with previous FW release ?
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

sectroyer
Official SamyGO Developer
Posts: 5954
Joined: Wed May 04, 2011 5:10 pm

Re: 22F5400 - SH always in update.

Post by sectroyer »

I wouldn't do that, it might brick tv. Also there are tons of used boards on the market and it does NOT have to be for "same model". It's enough if it fits :) I upgraded my tv (by changing board) from EH to ES via board change :D
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

miazza
SamyGO Project Donor
Posts: 752
Joined: Wed Apr 03, 2013 6:10 pm

Re: 22F5400 - SH always in update.

Post by miazza »

Good point.
Do you think there is any chance to find a compatible mobo that supports also H.265 ? This would be worth.
The best would be to find one rootabe

Inviato dal mio SM-G960F utilizzando Tapatalk
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

sectroyer
Official SamyGO Developer
Posts: 5954
Joined: Wed May 04, 2011 5:10 pm

Re: 22F5400 - SH always in update.

Post by sectroyer »

What is "mobo"?
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

miazza
SamyGO Project Donor
Posts: 752
Joined: Wed Apr 03, 2013 6:10 pm

Re: 22F5400 - SH always in update.

Post by miazza »

Mother Board Mo Bo

Inviato dal mio SM-G960F utilizzando Tapatalk

AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

sectroyer
Official SamyGO Developer
Posts: 5954
Joined: Wed May 04, 2011 5:10 pm

Re: 22F5400 - SH always in update.

Post by sectroyer »

miazza wrote:
Sun Oct 04, 2020 12:43 pm
Mother Board Image Mo Bo

Inviato dal mio SM-G960F utilizzando Tapatalk
F doesn't have h265, I think J is oldest one that has it. Tough you could buy cheap J now :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

Post Reply

Return to “[F] Support”