22F5400 Brick

Here for general support for F series TVs, request and problem solve area.
Post Reply

miazza
SamyGO Project Donor
Posts: 752
Joined: Wed Apr 03, 2013 6:10 pm

22F5400 Brick

Post by miazza »

And finally, after several try to reset my TV I accidentally triggered MICOMM upgrade.
This is fatal.

Do anyone know where to buy a new motherboard for this TV ?

Thanks
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

miazza
SamyGO Project Donor
Posts: 752
Joined: Wed Apr 03, 2013 6:10 pm

Re: 22F5400 Brick

Post by miazza »

After a couple of days of googling and studies I found that in order to fix this problem it is necessary to flash the WT61P807 device with its binary dump (https://remont-aud.net/forum/108-49536-1 for my 22F5400).

I found a french people who is available to sell for 20 Euro the flashed WT61P807 with the right FW.

I also understood that a dedicated programmer RT809F would allow the Weltrend flash even without dismounting the device from the motherboard.

I try to keep this discussion updated in order to post my progress and maybe have some assistance and help from forum experts who might have already faced similar situations.

Russian people seems to well know how to fix the issue.
Please feel free to post any usefull information that can help in understnding the fixing process.
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

miazza
SamyGO Project Donor
Posts: 752
Joined: Wed Apr 03, 2013 6:10 pm

Re: 22F5400 Brick

Post by miazza »

Finally I managed to fix the micom by flashing the right dump WT61P807 .

If you need details I will post the how to.
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

Post Reply

Return to “[F] Support”