I'm almost sure it won't work...
Replace your PVRtoTS.init script with this one:
"ts_outdir" will be dynamically changed according to MOUNT_PATH
Then it should work
I've rooted my F6500 (german), have done the steps 'PVRAnyDEV', 'PVRtoTS', 'ZoelPVR', 'ts2filename' and 'zoneinfo' !
In 'libPVRtoTS.config' I've set:
// "ts_outext": ".srf" && ts_outdir == "" -> overwrite .srf with decrypted .ts
// wait until 'wait_frame_cnt' frames are available for decryption, check again after 'wait_ms' millisecs
// $1 = decrypted file path
//e.g. "exec_when_done": "/mnt/opt/privateer/usr/libso/ts2filename"
in 'smb_userdata' with the set samba shares.
It works !!!
The recorded .ts-file is found on my NAS samba share in the above mentioned folder 'SamyPVR' (own title).
But the same recorded file is also/yet on the tv-attached usb-drive (/dtv/usb/sdb1/CONTENTS/), and when the drive is full, the tv claimes to have not enough space.
How can I block this recording on the attached usb-drive, which is the only choosable recording device in the tv's menu.
Would the problem be gone, if I could make the samba share folder to the choosable recording device in the tv's menu?
I've read, that this could have something to do with the absence of the folder 'CONTENTS' ?
Would I have to do further steps in or with some files found in this forum ?
And now a short feedback (I think useful for the developers in this forum and the users too) for the now working things on my f6500 after absolving the above mentioned steps:
I can record onto the NAS and the same time look another video from the same or another share!
I call it with the tv's remote in 'sources - virtual-usb - ...' , where the samba shares appear with the present video files!
I can at the same time change the source of the tv to my attached cable-receiver without interrupting the recording, but I can't change the channel in the source 'tv' (also like with an umounted tv; also 'screen mirror'-function interrupts the recording)!
The recorded file (on the samba share) has the former set time addings before and after the recording time, and also the correct name (from the following main movie) with time and date (with corrected time for european berlin zone).
I can push the power key during the recording, and the tv goes into some standby mode (screen off) with no red led as normal and with further recording without disturbances!
Connection from tv to nas is a fritzbox 7490 over wlan (wpa2-aes-key and 40MHz broad channel with the 5GHz net and marked wlan speed of 150-350 Mbit/s up and down! Other file operations on the same NAS folder or further network activity over the same router don't disturbe the recording yet (some controlled with 'tsdoctor' program, which scans the video file for errors).
All in all I'm very satified, that I could manage this all, although I don't know much about linux and there commands and programming languages.
And therefore I'd like to thank all working people here at this project (for there files and scripts and other tipps and help).
It would be great, if we could manage the above mentioned problem with the dual recording, I would like to only record on my nas. If you have to ask me about several "file / script status and locations", which is very likely, please ask and I will give infos as good as I can about my system so far established (which I think is still not perfect or complete in your developers seeing; but things must go on).
Many thanks in advance