[v5.0 - FINAL] SmartAdblock + Extras | E/F/H | August 15, 2019
Posted: Tue Feb 28, 2017 11:12 pm
I created a little script which helps you to block ads on your SmartTv..
The used hosts files are around 16MB big!
Reduced the size of all packs since it is not needed and can cause issues..
I don't know if anyone is still using this but I decided to make one last update with continously updated hosts sources and overall smaller hosts files. Please see below.
You only have to activate ad blocking once through the script, it then will be applied on every boot.
The tool can also download & install libAlert and/or libText!
You can choose between following options:
Instructions:
Short way
1. Run following command on your tv
2. Change permissions of the script
3. Run script
Notes:
So far tested on:
Changelog:
v5.0
Download SmartAdblock_v4.0.zip (you can update to 5.0 through the script) or just check instructions above to download the latest version directly to your tv!
The used hosts files are around 16MB big!
Reduced the size of all packs since it is not needed and can cause issues..
I don't know if anyone is still using this but I decided to make one last update with continously updated hosts sources and overall smaller hosts files. Please see below.
You only have to activate ad blocking once through the script, it then will be applied on every boot.
The tool can also download & install libAlert and/or libText!
PicturesShow
Main menu:
Extras:
Extras:
You can choose between following options:
- Spark (Size: ~1.3M)
- BluGo (Size: ~3.6M)
- Blu (Size: ~6.7M)
- Only block Samsung's update servers (always included)
Old version (until 4.2)Show
- Master (general ad blocking list)
- Master + Gambling
- Master + Porn
- Master + Social
- Master + Gambling + Porn
- Master + Gambling + Social
- Master + Porn + Social
- Master + Gambling + Porn + Social
- Lightweight
- Only block Samsung's update servers (included in everything above)
Instructions:
Short way
1. Run following command on your tv
Code: Select all
curl -#ko /mtd_rwarea/adblock.sh "https://raw.githubusercontent.com/lekron42/smart.adblock/master/adblock.sh
Code: Select all
chmod 755 /mtd_rwarea/adblock.sh
Code: Select all
./mtd_rwarea/adblock.sh
Long way (old instructions)Show
1. Download the attachment
2. Copy adblock.sh to /mtd_rwarea/
3. Set permissions to 755 (rwxr-xr-x)
4. Run script
5. Choose one of the options
6. Enjoy browsing the web without ads! (YouTube app included)
2. Copy adblock.sh to /mtd_rwarea/
3. Set permissions to 755 (rwxr-xr-x)
Code: Select all
chmod 755 /mtd_rwarea/adblock.sh
Code: Select all
sh /mtd_rwarea/adblock.sh
6. Enjoy browsing the web without ads! (YouTube app included)
Notes:
So far tested on:
- H series
- F series
- E series
Changelog:
v5.0
Code: Select all
- This is the final version
- Old hosts files are too big
and can cause issues on some tvs..
- Switched to better sources
Old ChangelogShow
v4.0Show
- Added integrated update checker (will check for new version on each run)
- Added a lightweight hosts file which gets updated constantly (should be sufficient for most users)
- Added new samsung update servers
- Code refactoring
- Added a lightweight hosts file which gets updated constantly (should be sufficient for most users)
- Added new samsung update servers
- Code refactoring
v3.0Show
- Various improvements
- Added an option to download & install libAlert and libText
- Added an option to download & install libAlert and libText
v2.1Show
- Script now displays currently active profile
v2.0Show
- Changed hosts source
- Optimized & cleaned hosts files
- Optimized & cleaned hosts files
v1.2Show
- Option to blacklist hosts
- Added localhost
- libText support
- Added localhost
- libText support
v1.1Show
- Added ability to block Samsung's update servers
v1.0Show
- Initial release
Download SmartAdblock_v4.0.zip (you can update to 5.0 through the script) or just check instructions above to download the latest version directly to your tv!