Page 89 of 157

Re: [!!!] Rooting H on latest firmwares

Posted: Sun Jan 03, 2016 11:28 pm
by Poloche9x7
Hello, i will come back to your community because since i have rooteed my Samsung TV, i have many crash all time.
I turn ON my TV, i'm waiting few minutes for root is actived, i can telnet et ftp, i can record with NoDRM li, etc... and few minutes laters, my TV crash ! I can't use my remote controller, i'm obligated to Unplug the Power cable to turn OFF my tv.

I have just rooted the tv, installed LibSwitchNET to lan, and installer libNoDRM ... nothing else ! Why my tv is constantly crash after few minutes ?
?You also HAVE to disable Watchdog in service menu or you'll get permanent random unexpected crashes.
---> OK
?Menu->System->General->Quickly Power OFF Samsung - this option must be OFF
?Menu->System->General->Samsung Instant ON - this option must be OFF
---> I have'nt this option in my Ssystem Menu !!!

Please help me, because it's very not usable with this issue :s

Re: [!!!] Rooting H on latest firmwares

Posted: Mon Jan 04, 2016 8:57 am
by horatyu
Try change your memory stick with data samygo

Re: [!!!] Rooting H on latest firmwares

Posted: Wed Jan 06, 2016 11:13 pm
by nokixxx
Hallo pleas help mi tv h6200 2135 firmware root ok. Wifi ok. No mac adress .

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Jan 08, 2016 2:56 pm
by kmx777
Hello after reading a section on H-series, I realized that this T-NT14UDEUC-1050.1 BT-s . During the installation InstallSamyGO-H SamyGO and I have here that turns out download/file.php?id=7003&mode=view reading of the week-this forum just headache is not as simple as it seems. When all this falls in the translator to insert. Here is the full TV model UE48HU8500 by: T-NT14UDEUC-1050.1 BT-s now I understand when you have to wait to get any information about this version on
I know that you need to attach the log and the journal. And he can't connect with all these protocols with FTP, SSH and Telnet
I just want you said you could set it via: T-NT14UDEUC-1050.1 BT-s that things worked.
Maybe someone already for this model of TV UE48HU8500 by: T-NT14UDEUC-1050.1 BT-s put InstallSamyGO-H and SamyGO and it works help me guys, please.
Update now I'm disconnected in the TV.
Thanks in advance

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Jan 08, 2016 6:45 pm
by sectroyer
You did NOT block updates on router and did NOT disable OTN Support :) Without it NO ROOT :)

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Jan 09, 2016 12:16 pm
by pabos
I use a raspberry pi as "device-in-the-middle" to block every connection excepted those from the Whitelist.

So root can come :D :D

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Jan 09, 2016 12:22 pm
by sectroyer
pabos wrote:I use a raspberry pi as "device-in-the-middle" to block every connection excepted those from the Whitelist.

So root can come :D :D
What firmware version ? :)

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Jan 09, 2016 12:53 pm
by pabos
2790.. the idea came too late :roll:
but I'm sure you will be able to root in the near future, right? :lol: :lol:

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Jan 09, 2016 2:53 pm
by Htchoicy
Hi there,

I am having trouble with my root on UA55HU7500. I have posted here before but thought I upload all the logs properly this time.

Basically, when I run the widget and reboot, the root works and I have both telnet and ftp access. However, after turn off the TV, unplug the USB from TV to run patch.bat before plugging it back to the TV, the root no longer works and SamyGo no longer appears on my list of INPUTs. In order for me to get the root working again, I have to run the widget and reboot. However, after a further reboot after that (regardless of whether I run patch.bat) or not, the root no longer works. I have never unplugged the USB from the TV whilst the TV is on, nor have I ever turned it on without the root USB plugged in.

Here are my logs.

insmod_qca.sh
SpoilerShow

Code: Select all


echo " insmod_qca.sh begin"
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x5e
echo " insmod_qca.sh end"
sam.log
SpoilerShow

Code: Select all

+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sda/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sda/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
+ [ 0 -ne 0 ]
+ + /bin/busybox/bin/dmesg
 grep anty
 [antysfd] loaded
 [antysfd] security_ops: 0xc03813f0
 [antysfd] sfd_mmap_file_hook: 0xbe40a810
 [antysfd] close: 0xc00b3db0
 [antysfd] open: 0xbe409c44
 [antysfd] Starting sfd_uep_check_elf_file search at: 0xbe409c44
 [antysfd] found DMB SY at: 0xbe40a764
 [antysfd] branch sfd_uep_check_elf_file: 0xbe40a77c
 [antysfd] sfd_uep_check_elf_file: 0xbe400384
 [antysfd] Patching sfd.ko successful!!!
antysfd mod ld
+ chmod +x /tmp/ntkfree
+ mknod /dtv/ntkaxis c 140 0
+ /tmp/ntkfree
ioctl executed
Clearing region: 0 on MAU: 0 - OK!!!!
Clearing region: 1 on MAU: 0 - OK!!!!
Clearing region: 2 on MAU: 0 - OK!!!!
Clearing region: 3 on MAU: 0 - OK!!!!
Clearing region: 4 on MAU: 0 - OK!!!!
Clearing region: 0 on MAU: 1 - OK!!!!
Clearing region: 1 on MAU: 1 - OK!!!!
Clearing region: 2 on MAU: 1 - OK!!!!
Clearing region: 3 on MAU: 1 - OK!!!!
Clearing region: 4 on MAU: 1 - OK!!!!
+ cp /dtv/usb/sda/SamyGO/samyGOso /tmp/
cp: can't stat '/dtv/usb/sda/SamyGO/samyGOso': No such file or directory
+ cp /dtv/usb/sda/SamyGO/libNetSwitch.so /tmp/
cp: can't stat '/dtv/usb/sda/SamyGO/libNetSwitch.so': No such file or directory
+ chmod +x /tmp/samyGOso
chmod: /tmp/samyGOso: No such file or directory
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sda/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sda
checking /dtv/usb/sda
+ /bin/sleep 1
+ [ -e /dtv/usb/sda/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
+ cp /dtv/usb/sda/SamyGO/samygo_telnetd /dtv/
+ chmod +x /dtv/samygo_telnetd
+ cp /dtv/usb/sda/SamyGO/busybox /tmp/bin/
+ /dtv/samygo_telnetd 33
Starting simple telnet server
Socket created
bind done
Waiting for incoming connections...
+ chmod +x /tmp/bin/busybox
+ /tmp/bin/busybox --install -s /tmp/bin
+ sync
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
tcpsvd: listening on 0.0.0.0:21, starting
+ ln -s /dev/loop3 /tmp/loopnone
+ sync
+ [ -e /dtv/usb/sda/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda/SamyGO/samyext4.img
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
+ /tmp/bin/busybox --install -s /mnt/bin
+ sync
+ rm /mnt/sam.log
rm: can't remove '/mnt/sam.log': No such file or directory
+ ls -la /mnt/bin /mnt/doc /mnt/etc /mnt/firmware /mnt/lib /mnt/lost+found /mnt/mc /mnt/opt /mnt/rcSGO /mnt/sbin /mnt/src /mnt/usr /mnt/var
+ echo ===========================
+ echo Starting rcSGO from run1.sh
+ echo ===========================
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt
vermagic
SpoilerShow

Code: Select all

vermagic

0176, product SMP preempt mod_unload ARMv7 

patch.bat
SpoilerShow

Code: Select all

Searching for vermagic postion. Please wait...
Found vermagic at: 1329
Vermagic patch position is: 1338
File size is 43
Zero position is 1381
Vermagic is:
0176, product SMP preempt mod_unload ARMv7
rawwrite dd for windows version 0.6beta3.
Written by John Newbigin <jn@it.swin.edu.au>
This program is covered by terms of the GPL Version 2.

notrunc
43+0 records in
43+0 records out
rawwrite dd for windows version 0.6beta3.
Written by John Newbigin <jn@it.swin.edu.au>
This program is covered by terms of the GPL Version 2.

notrunc
1+0 records in
1+0 records out
Press any key to continue . . .
My Widget screenshot is also attached.
IMG_2638.JPG
Please help me everyone. Thanks very much for your help.

Regards,
Scott

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Jan 09, 2016 3:01 pm
by sectroyer
Okay everything looks GOOD. Please replace data.zip with data_0x5e.zip and RE-root :)