I am very interested in this project !!
I have spent a lot of time searching the best media center for sh4 architecture due to the duckbox xbmc is too heavy for my stx7105 STA box.
ShowTime seems a good solution for me and hope that you will publish it soon.
Here is my project: porting debian wheezy to sh4
And this is my github. Currently I have only porting kernel 220.127.116.11, duckbox and debian wheezy to support my pdk7105(stx7105) STB.
I plan to porting showtime on it, but I don't know much about directfb and libstgles.
If I have any of your help, it may reduce lot of time to porting showtime on my stx7105 STB.
Any hint or help is appreciated !
After 4 years of inactivity I was forced to remove the dust from this project.
Czech broadcasters are changing from DVB-T to DVB-T2.
I bought an Amlogic S905 box (Mecool KII) and connected it to HDMI.
But the TV with original SW showed substantial incompatibilities.
Probably HDMI-CEC negotiation ended up with no sound after couple of seconds,
so HDMI-CEC (Anynet+) had to be switched off.
After 5 or 10 minutes signal several times dropped out and started again.
I tried with my test image: no problems at all !!!
So the recent update adds:
- ability to select HDMI
- decoding remote control from Micom instead of LiRC
- simplistic HDMI-CEC implementation
No progress with OSD in HDMI mode - not yet possible.
So the TV now works as a dumb HDMI monitor with programmable HDMI-CEC.
This is all I want.
Eventually I will port my changes on the top of
Let me know if somebody interested.