How to enable voice recognition and gestures on the US J6300 series?

General forum talking area for J series TVs.
Post Reply

ynon
Posts: 13
Joined: Fri Jan 29, 2016 8:16 am

How to enable voice recognition and gestures on the US J6300 series?

Post by ynon »

What should I change in the service menus, and/or filesystem?

Specifics:
[UNXXJ6300]
T-HKMFAKUC-1440.3
T-HKMFAKUS-1023
rel-hawkall-atsc-rca-hawk-m--fhd_20151210.1 (Release)
DTCP Not support (we can change this as is known)

Note: I added an external camera which works with Skype and the Camera app in the US locale

tia,

ynon, aka nony

Zamzung
Posts: 16
Joined: Mon Dec 14, 2015 3:07 pm

Re: How to enable voice recognition and gestures on the US J6300 series?

Post by Zamzung »

You need to activate smart control support in service menu and pair the smart remote afterwards.
viewtopic.php?f=90&t=10169

ynon
Posts: 13
Joined: Fri Jan 29, 2016 8:16 am

Re: How to enable voice recognition and gestures on the US J6300 series?

Post by ynon »

Zamzung wrote:You need to activate smart control support in service menu and pair the smart remote afterwards.
viewtopic.php?f=90&t=10169
Sorry, I need specific parameters, including camera gesture control.

Anyone?

-ynon

klmna
Posts: 2
Joined: Tue Nov 22, 2016 3:55 am

Re: How to enable voice recognition and gestures on the US J6300 series?

Post by klmna »

many of these parameters correspond to the potential of iron and firmware.
many simply block the opportunities of some models and unlock others. for example 3d or smart remote.
I have so far failed to activate voice control j6390 euro: voice recog=on and smart control=on in service menu.
tell about their successes please.

Post Reply

Return to “[J] General”