[ROOT] J ROOT on T-HK* fw up to 1480
Re: [App] J ROOT on T-HK* fw up to 1480
Indeed if you can't understand commandline syntax, better use GUI.
FYI, PVRdecoder and srf2ts.sh are using same drmdecrypt
FYI, PVRdecoder and srf2ts.sh are using same drmdecrypt
I do NOT receive any PM. Please use forum.
Re: [App] J ROOT on T-HK* fw up to 1480
A bit of an offtopic question, but do you guys also provide an equivalent for libSoftPowerOff? Or is it not needed for Tizen TVs (e.g. shell is available in off state)?
H6400, firmware 2602.2 downgraded to 2130
Re: [App] J ROOT on T-HK* fw up to 1480
Currently none existing for J where using Samsung's "instant" cause similar troubles as previous series (umount USB=break root). I've got some private beta for K (to be released later!), but almost impossible to port without J at hand
I do NOT receive any PM. Please use forum.
Re: [App] J ROOT on T-HK* fw up to 1480
Ok, thanks!
It was a nice feature - allowing you to use the TV as a "server" even when it was off.
It was a nice feature - allowing you to use the TV as a "server" even when it was off.
H6400, firmware 2602.2 downgraded to 2130
Re: [App] J ROOT on T-HK* fw up to 1480
TV as a "server" ? I have not heard yet.
The router with OpenWrt is enough for 30 €
The router with OpenWrt is enough for 30 €
Re: [App] J ROOT on T-HK* fw up to 1480
Well. Maybe server is not the right word. I meant as a headless system. For example, for me is easier to work on the TV when it's off, and I'm not at home.
But since you can run a different rootfs with chroot, the TV could be quite useful and run a mainline OS like debian.
By the way, @zoelechat: are Tizen TVs finally armhf, or are they still armel?
But since you can run a different rootfs with chroot, the TV could be quite useful and run a mainline OS like debian.
By the way, @zoelechat: are Tizen TVs finally armhf, or are they still armel?
H6400, firmware 2602.2 downgraded to 2130
Re: [App] J ROOT on T-HK* fw up to 1480
Soft
More...Show
Code: Select all
Hardware: Samsung SDP1501(Flattened Device Tree)
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 1
Model name: ARMv7 Processor rev 1 (v7l)
CPU max MHz: 1300.0000
CPU min MHz: 100.0000
BogoMIPS: 49.15
Virtualization type: full
Flags: swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
I do NOT receive any PM. Please use forum.
Re: [App] J ROOT on T-HK* fw up to 1480
Hi, probabbly stupid question but when ssh-ying as root and trying change password escapes msg:
passwd: can't create '/etc/passwd+': Read-only file system
passwd: can't update password file /etc/passwd
any help?
passwd: can't create '/etc/passwd+': Read-only file system
passwd: can't update password file /etc/passwd
any help?
Re: [App] J ROOT on T-HK* fw up to 1480
Even if you were able to change password that way, it would be overwritten on reboot since it's hardcoded in ssh script. Actually password change is not intended, we're not in Ubuntu
Here's a small script to change it (will save me writing procedure!), yet to be improved maybe, will include to next sysroot if any
(extract script to eg. SYSROOT/usr/bin)
Here's a small script to change it (will save me writing procedure!), yet to be improved maybe, will include to next sysroot if any
(extract script to eg. SYSROOT/usr/bin)
Code: Select all
UE49KS7000~ # rootpwd.sh
Enter new SamyGO root password:
Password successfully changed, now reboot TV to apply.
UE49KS7000~ # reboot
You do not have the required permissions to view the files attached to this post.
I do NOT receive any PM. Please use forum.
Re: [App] J ROOT on T-HK* fw up to 1480
even if we are not in Ubuntu, I will appreciate, with all due respect, answer to question: Where we are?:)we're not in Ubuntu
anyway thanks for solution
Last edited by ulster444 on Thu Jul 27, 2017 1:12 am, edited 1 time in total.