Playing with service menu I made a 40'' brick!!! UN40C5000

Support for C series TVs that all user could ask. Please do not ask a questions at other forums.

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: Playing with service menu I made a 40'' brick!!! UN40C5000

Post by juusso »

Ok, do not worry!

Your chip to reset is the same as in this post. Read carefull instruction what to do.

You need this 8-pin microchip (in the center)
Here is your full mainboard and marked pinns to join.
Join red marked pins. If you do not get success, try blue line.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: Playing with service menu I made a 40'' brick!!! UN40C5000

Post by juusso »

try other 8 pin microchip (ATML) near to the big black radiathor. Do the same an hope to success. It can be, that other chip is responsible for eeprom settings. You need short 5and 6 pins together. I do not mark pins, its the same as previous.
http://img841.imageshack.us/img841/2236/dsc02221a.jpg
Here is no more 8-pin ATML chips on board as i see, right?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

User avatar
erdem_ua
SamyGO Admin
Posts: 3114
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: Playing with service menu I made a 40'' brick!!! UN40C5000

Post by erdem_ua »

And always pray to God for being success before try. It helps, really :!: I tried by myself and it works :)
If you are successful, don't forget to pray again for thank or next time you might not lucky as first time.

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: Playing with service menu I made a 40'' brick!!! UN40C5000

Post by juusso »

Ok, i think you need look closer to IC401 microchip.
Make sure, that you get god contact to pins (maybe here you do not get contact?).
Join red an pray as erdem said. It helps :)

zipo16,
ex link does not help anything because to enter to TDM we need:
-debug on ServiceMenu
-working exeDSP

I do not think that exeDSP starts at all on his TV, because he made wrong settings in hardware level and TV bricks before...
I see magic button on board, it should switch TV to debug mode. Maybe worth to try?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Post Reply

Return to “[C] Support”