[APP] openvpn-2.3.2 C(arm)

Support for C series TVs that all user could ask. Please do not ask a questions at other forums.

zoelechat
Official SamyGO Developer
Posts: 8445
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [APP] openvpn-2.3.2 C(arm)

Post by zoelechat »

juuso wrote:It is alias for mkdir. Issue is not related to md .
My bad :mrgreen:

Code: Select all

echo "alias md='mkdir -p'" >> /dtv/.ashrc
I do NOT receive any PM. Please use forum.

sectroyer
Official SamyGO Developer
Posts: 5940
Joined: Wed May 04, 2011 5:10 pm

Re: [APP] openvpn-2.3.2 C(arm)

Post by sectroyer »

I think this openvpn doesn't work anyway :D It segfaults for me :) No particular reason. Someone should try to compile openvpn using C toolchain. Maybe then it will work. If no then I am out of ideas :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

User avatar
beatfreak
SamyGO Project Donor
Posts: 590
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: [APP] openvpn-2.3.2 C(arm)

Post by beatfreak »

juuso wrote:It is alias for mkdir. Issue is not related to md .
never doubted

openvpn itself seems to be working, looks more like an issue with my config...
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

sectroyer
Official SamyGO Developer
Posts: 5940
Joined: Wed May 04, 2011 5:10 pm

Re: [APP] openvpn-2.3.2 C(arm)

Post by sectroyer »

beatfreak wrote:
juuso wrote:It is alias for mkdir. Issue is not related to md .
never doubted

openvpn itself seems to be working, looks more like an issue with my config...
But I have good config and get only segfault :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

User avatar
beatfreak
SamyGO Project Donor
Posts: 590
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: [APP] openvpn-2.3.2 C(arm)

Post by beatfreak »

possible that you provide your config?

i am also using openvpn on my win-xp work notebook, the segfaults there were due to config errors / changes on the server side that required changes in my client config

i am working on 90_90_ovpn-tun.init
current state:

Code: Select all

#!/bin/sh
#
# .. Copyright 1996-2010, ZsoltTech.Com
#       by Ser Lev Arris <arris@ZsoltTech.Com>
#
#       donated for the SamyGo Project
#       http://samygo.sourceforge.net/
#
#       Version: 90_90_ovpn-tun.init test by beatfreak

. /dtv/SGO.env

### begin configure me

### end configure me

case $1 in
        start)
        [ -d /dtv/net ] ||  mkdir -p /dtv/net  
        [ -c /dtv/net/tun ] || mknod /dtv/net/tun c 10 200
        insmod $MOD_DIR/kernel/drivers/net/tun.ko
        ;;
        stop)
        echo "Nothing to do"
        ;;
        status)
        echo `dmesg | grep tun`
        echo `lsmod | grep tun`
        echo `ls -l /dtv/net/`
        ;;
        *)
        echo "Usage: $0 {start|stop|status}" 1>&2
        exit 0
        ;;
esac
todo:
check if module already loaded
on stop unload module and remove node
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

sectroyer
Official SamyGO Developer
Posts: 5940
Joined: Wed May 04, 2011 5:10 pm

Re: [APP] openvpn-2.3.2 C(arm)

Post by sectroyer »

beatfreak wrote:possible that you provide your config?

i am also using openvpn on my win-xp work notebook, the segfaults there were due to config errors / changes on the server side that required changes in my client config

i am working on 90_90_ovpn-tun.init
current state:

Code: Select all

#!/bin/sh
#
# .. Copyright 1996-2010, ZsoltTech.Com
#       by Ser Lev Arris <arris@ZsoltTech.Com>
#
#       donated for the SamyGo Project
#       http://samygo.sourceforge.net/
#
#       Version: 90_90_ovpn-tun.init test by beatfreak

. /dtv/SGO.env

### begin configure me

### end configure me

case $1 in
        start)
        [ -d /dtv/net ] ||  mkdir -p /dtv/net  
        [ -c /dtv/net/tun ] || mknod /dtv/net/tun c 10 200
        insmod $MOD_DIR/kernel/drivers/net/tun.ko
        ;;
        stop)
        echo "Nothing to do"
        ;;
        status)
        echo `dmesg | grep tun`
        echo `lsmod | grep tun`
        echo `ls -l /dtv/net/`
        ;;
        *)
        echo "Usage: $0 {start|stop|status}" 1>&2
        exit 0
        ;;
esac
todo:
check if module already loaded
on stop unload module and remove node
Okay I will explain it like this :) Once you get your config "working" you will get a bunch of segfaults. I have a correct config that works on multiple machines with multiple systems (including few mobile devices). The same config on C causes segfault :) Before you (or someone) recompiles openvpn you can abandon other steps ;)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

Mkò
Posts: 199
Joined: Fri Jul 29, 2011 2:34 pm

Re: [APP] openvpn-2.3.2 C(arm)

Post by Mkò »

What is openvpn?
it useful for what?
I remeber to everyone that on samygo download sections and on samsung oss site the c series toolchain is available.
I have the right toolchain for c series but the problem is that i don't know how to use it :D
i try to compile ffmpeg rtpdump without good results the problem are dependencies you have to compile it too and i'm noob in compiling.
For what i know you need openssl 0.98 version too compiled for arm c series to get it working.
but maybe someone that is expert can compile openvpn for you try to ask to juuso.
good luck. :lol:

User avatar
bugficks
Official SamyGO Developer
Posts: 1062
Joined: Tue Jun 25, 2013 3:56 pm

Re: [APP] openvpn-2.3.2 C(arm)

Post by bugficks »

openVirtualPornoNetwork

User avatar
beatfreak
SamyGO Project Donor
Posts: 590
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: [APP] openvpn-2.3.2 C(arm)

Post by beatfreak »

bugficks wrote:openVirtualPornoNetwork
yep, brings the 98% of the internet which is porn directly into the filesystem of your tv, no messing around with widgets or upnp...

@sectroyer: understood, was worth the try... would have been nice to be able to use the BigButtsChannel iPlayer here...
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

sectroyer
Official SamyGO Developer
Posts: 5940
Joined: Wed May 04, 2011 5:10 pm

Re: [APP] openvpn-2.3.2 C(arm)

Post by sectroyer »

beatfreak wrote:
bugficks wrote:openVirtualPornoNetwork
yep, brings the 98% of the internet which is porn directly into the filesystem of your tv, no messing around with widgets or upnp...

@sectroyer: understood, was worth the try... would have been nice to be able to use the BigButtsChannel iPlayer here...
Try recompiling openvpn, then it might work :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

Post Reply

Return to “[C] Support”