[ROOT] Rooting E/F on latest firmwares

[mazda6]

Hello

( sry for my bad english)

my TV = UE 46 F 6510

software = T-MST12DEUC-2110.1

i try it with the instructions, but it doesn't work on my TV.
i have the same problem ( picture )
ftp with fillezilla dosnt work with the IP from the TV

[sectroyer]

It DOES work on your TV and it even works great Your problem is either bad samyext4.img or you are using Wi-Fi/WLAN

[mazda6]

It DOES work on your TV and it even works great Your problem is either bad samyext4.img or you are using Wi-Fi/WLAN

i have also tested it with LAN and the samyext4.img file i have from the first site downloaded ..where i can become a good file when this one is not good

[sectroyer]

well you should post the image from the LAN try. Also you should try debug SamyGO_data Everything explained in first post Just instead of reading you decided to simply NOT try

[mazda6]

well you should post the image from the LAN try. Also you should try debug SamyGO_data Everything explained in first post Just instead of reading you decided to simply NOT try

I do not sheep, did everything as Introduction. created folder SamyGO_data.zip from SamyGO.zip file samyext4.img, run.sh, run1.sh, data.zip desired term.
SamyGO-F-SM-MST-Fix USB pasted on USB
USB to TV smatrhub, instaliert Folder SamyGO-F-SM-MST-Fix
get the following screen television off and on again does not happen next
FTP connection unsuccessful (user, pass ??

[sectroyer]

well you should post the image from the LAN try. Also you should try debug SamyGO_data Everything explained in first post Just instead of reading you decided to simply NOT try

I do not sheep, did everything as Introduction. created folder SamyGO_data.zip from SamyGO.zip file samyext4.img, run.sh, run1.sh, data.zip desired term.
SamyGO-F-SM-MST-Fix USB pasted on USB
USB to TV smatrhub, instaliert Folder SamyGO-F-SM-MST-Fix
get the following screen television off and on again does not happen next
FTP connection unsuccessful (user, pass ??

See red NO in /dtv/SamyGO. You need to reroot and switch to cable. Also you did NOT do everything as explained in first post. Last point of instruction says:

In case of issues:
SPOILER: SHOW

It doesn't look you did read it

[mazda6]

well you should post the image from the LAN try. Also you should try debug SamyGO_data Everything explained in first post Just instead of reading you decided to simply NOT try

I do not sheep, did everything as Introduction. created folder SamyGO_data.zip from SamyGO.zip file samyext4.img, run.sh, run1.sh, data.zip desired term.
SamyGO-F-SM-MST-Fix USB pasted on USB
USB to TV smatrhub, instaliert Folder SamyGO-F-SM-MST-Fix
get the following screen television off and on again does not happen next
FTP connection unsuccessful (user, pass ??

See red NO in /dtv/SamyGO. You need to reroot and switch to cable. Also you did NOT do everything as explained in first post. Last point of instruction says:

In case of issues:
SPOILER: SHOW

It doesn't look you did read it

and again i have no conection with ftp do i need user/password?

[sectroyer]

and again i have no conection with ftp do i need user/password?

No you do NOT need user/password. But you DO need to follow directions. Now your log looks better I am still not sure you are using LAN or Wi-Fi... Also please use debug SamyGO_Data etc. to get log

[mazda6]

and again i have no conection with ftp do i need user/password?

No you do NOT need user/password. But you DO need to follow directions. Now your log looks better I am still not sure you are using LAN or Wi-Fi... Also please use debug SamyGO_Data etc. to get log

what should happen when the dasa TV turn off and on again, the widget automatically starters, dobijemli a message on the screen

thanks

[sectroyer]

what should happen when the dasa TV turn off and on again, the widget automatically starters, dobijemli a message on the screen

thanks

Well users should read first post and use Debug SamyGO_data but they don't. Also users should NOT use Wi-Fi