[App] libSoftPowerOff D/E/F/H

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

zoelechat
Official SamyGO Developer
Posts: 8369
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libSoftPowerOff D/E/F/H

Post by zoelechat » Sun Jun 18, 2017 1:30 pm

In that lib, not as far as I remember... Otherwise I'm sure libChanList reports it (you can use NOLIST arg to not parse channels uselessly everytime):

Code: Select all

[ChanList] SamyGO D/E/F/H libChanList v0.2.2 - (c) zoelechat 2015
[ChanList] lib_init, >>>
[ChanList] TV mode:     0       Air     (Soft-Off)
[ChanList] Current channel:     2       France 2
[...]
I do NOT receive any PM. Please use forum.

mad_ady
SamyGO Project Donor
Posts: 264
Joined: Sun May 03, 2015 10:42 am

Re: [App] libSoftPowerOff D/E/F/H

Post by mad_ady » Sun Jun 18, 2017 2:12 pm

I'm worried about using chanlist, because (as far as I know) it needs to inject a library each time and this increases the risk of an osd crash. Have you noticed such problems with repeated use, or is it all in my head?
H6400, firmware 2602.2 downgraded to 2130

zoelechat
Official SamyGO Developer
Posts: 8369
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libSoftPowerOff D/E/F/H

Post by zoelechat » Sun Jun 18, 2017 2:28 pm

Not especially :)
Not sure it would be 100% reliable (e.g: PVR and other "not using power button" cases), but you could also setup some dummy (even unexisting) CMD_ON/CMD_OFF then check in log which one was "launched" as latest:

Code: Select all

[SoftPowerOff] Launching CMD_OFF: ... 
[...]
[SoftPowerOff] Launching CMD_ON: ... 
I do NOT receive any PM. Please use forum.

miras_mi
SamyGO Project Donor
Posts: 29
Joined: Sun Aug 02, 2015 3:28 pm

Re: [App] libSoftPowerOff D/E/F/H

Post by miras_mi » Mon Feb 11, 2019 12:54 pm

It works perfectly with oscam. Instant descrambling when tv "wakes up", no more need to wait about 3 mins each time. But LED panel connected to usb it is still lighting. Is there any option/command to disable the usb power with SoftPowerOff (H model)?

zoelechat
Official SamyGO Developer
Posts: 8369
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libSoftPowerOff D/E/F/H

Post by zoelechat » Mon Feb 11, 2019 5:18 pm

Nope. If you disable USB you break mounts therefore root, that's the main and essential difference vs built-in instant on.
I do NOT receive any PM. Please use forum.

Riquet065
Posts: 35
Joined: Wed May 16, 2018 3:26 pm

Re: [App] libSoftPowerOff D/E/F/H

Post by Riquet065 » Thu Aug 29, 2019 5:44 pm

Thank you for this lib, works good!
TV Samsung UE32F6470; Firmware T-MST12DEUC_2126.0

miazza
SamyGO Project Donor
Posts: 712
Joined: Wed Apr 03, 2013 6:10 pm

Re: [App] libSoftPowerOff D/E/F/H

Post by miazza » Fri Aug 30, 2019 7:52 am

miras_mi wrote:
Mon Feb 11, 2019 12:54 pm
It works perfectly with oscam. Instant descrambling when tv "wakes up", no more need to wait about 3 mins each time. But LED panel connected to usb it is still lighting. Is there any option/command to disable the usb power with SoftPowerOff (H model)?
Please remember that the TV in this condition is not OFF: it is maily the monitor to be OFF while the CPU is still running and consuming power.
Furthermore, OSCAM is always connected and running so consider to disable the oscan lib logging that can increase considerably and induce some issue on the TV (reboot ... no remote control ... etc...).
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

Riquet065
Posts: 35
Joined: Wed May 16, 2018 3:26 pm

Re: [App] libSoftPowerOff D/E/F/H

Post by Riquet065 » Sun Sep 01, 2019 9:20 am

miazza wrote:
Fri Aug 30, 2019 7:52 am
miras_mi wrote:
Mon Feb 11, 2019 12:54 pm
It works perfectly with oscam. Instant descrambling when tv "wakes up", no more need to wait about 3 mins each time. But LED panel connected to usb it is still lighting. Is there any option/command to disable the usb power with SoftPowerOff (H model)?
Please remember that the TV in this condition is not OFF: it is maily the monitor to be OFF while the CPU is still running and consuming power...
Personally i only use it to record with oscam, if i don't record i do a deep Power Off and stop all consuming power with a button between the wall and the tv, the sat decoder, the dvd reader and all device :-).
TV Samsung UE32F6470; Firmware T-MST12DEUC_2126.0

miazza
SamyGO Project Donor
Posts: 712
Joined: Wed Apr 03, 2013 6:10 pm

Re: [App] libSoftPowerOff D/E/F/H

Post by miazza » Mon Sep 02, 2019 8:38 am

Riquet065 wrote:
Sun Sep 01, 2019 9:20 am
...if i don't record i do a deep Power Off and stop all consuming power with a button between the wall and the tv, the sat decoder, the dvd reader and all device :-).
I do the same :)
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

Post Reply

Return to “[F] Software”