Bricked TV?
Re: Bricked TV?
Just to be sure that what I'm doing is correct..
1)unplug from electricity
2)make a short circuit b/w gnd & Sda
3)Switch on the TV( just pass electricity to the tv,don't switch on the tv through remote)
4) wait for 20secs
5) remove circuit and try to enter the service menu from the sequence mentioned (don't try to power on through remote directly)
Is the above one correct?
1)unplug from electricity
2)make a short circuit b/w gnd & Sda
3)Switch on the TV( just pass electricity to the tv,don't switch on the tv through remote)
4) wait for 20secs
5) remove circuit and try to enter the service menu from the sequence mentioned (don't try to power on through remote directly)
Is the above one correct?
Re: Bricked TV?
Wait more than 20 sec. But one of signs of success is no more connectivity error.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Bricked TV?
Ok do I wait till I press the buttons on the remote for entering service menu?
Re: Bricked TV?
Finallyyy!!! After 6 failed attempts , successfully reset the eeprom..
What I followed..
1) unplug the TV from power source
2) short the gnd & Sda
3) Switch on the Power supply
4) after waiting for about 30-40 odd secs
5) info+menu+mute+power
6) got a message on the TV "Please enter into service menu and set the values . Now removed the circuit..
7)Used the IR Service App (S1+S2)
8) Changed the local set,model,BOM etc
9)Click on factory reset
10)TV switches off
11) Switch on the TV
12) Now the TV is successfully reset.
Can't thank juusso and zoelechat enough for your support!!
Also if anyone don't find any success 1st time try till u succeed. Also remove the switch after every attempt.
One thing that I think was done wrong in the previous attempt was that as the space for shorting was very small, the pin kept moving from its original place . So be steady while shorting and try a few times till u succeed!
What I followed..
1) unplug the TV from power source
2) short the gnd & Sda
3) Switch on the Power supply
4) after waiting for about 30-40 odd secs
5) info+menu+mute+power
6) got a message on the TV "Please enter into service menu and set the values . Now removed the circuit..
7)Used the IR Service App (S1+S2)
8) Changed the local set,model,BOM etc
9)Click on factory reset
10)TV switches off
11) Switch on the TV
12) Now the TV is successfully reset.
Can't thank juusso and zoelechat enough for your support!!
Also if anyone don't find any success 1st time try till u succeed. Also remove the switch after every attempt.
One thing that I think was done wrong in the previous attempt was that as the space for shorting was very small, the pin kept moving from its original place . So be steady while shorting and try a few times till u succeed!
Re: Bricked TV?
Congratulations
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Bricked TV?
Good to know. True that the connector is very small, we could imagine an "epprom shorter" made from an old PCI socket for example, but best option remains not to play the sorcerer's apprentice
I do NOT receive any PM. Please use forum.
Re: Bricked TV?
Ok now after eeprom reset, the TV switches off by itself.. Happened twice in 2 hour now. Eco solution is off as well. What could be the problem? Thanks again!
Last edited by fahad96 on Mon Oct 02, 2017 11:21 am, edited 1 time in total.
Re: Bricked TV?
Also I just changed the local set,model and BOM in the service menu.. Do I need to enter any other setting after eeprom reset? Thanks Gaiam!
Re: Bricked TV?
No idea what`s wrong here. It should`t power off by default. NFI
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Bricked TV?
Disable watchdog maybe...
Cooling plate still touching CPU? In case you pulled too much while wondering how to remove it
Otherwise as long as you entered correct values TV requested, rest should be ok.
Cooling plate still touching CPU? In case you pulled too much while wondering how to remove it
Otherwise as long as you entered correct values TV requested, rest should be ok.
I do NOT receive any PM. Please use forum.