Thx a lot for your help
Yesterday I started to test on my TV in my bedroom with my new LED's and it seems to work. But the LED's where as shipped on a role and the number couldn't be right. But for testing if everything works it was enough.
Today I start on my TV in Livingroom but everytime I start Ambilight over console my TV crashes, but Screenshots I could make and everything works well. Maybe my Settings are fault.
I start with following over console to test if everything works:
Code: Select all
samyGOso -d -T -B -r -l /mnt/opt/privateer/usr/libso/libAmbiLight.so H_LEDS:101 V_LEDS:58 SERVER_IP:192.168.1.15 SERVER_PORT:5050 OFFSET:24 REVERSE:1
And here is my modified Sketch:
Code: Select all
#define NUM_LEDS 159
#define DATA_PIN 2
#define CLOCK_PIN 0
#define COLOR_ORDER RBG
#define serialRate 115200
#define MAX_BUFFER 512
#define FADE_STEPS 10
#define LOSE_TOLERANCE 250000 // tolerance while no data is received keeps previous leds, otherwise turns leds off
#define UDP_PORT 5050
CRGB leds[NUM_LEDS];
CRGB new_leds[NUM_LEDS];
CRGB fade_amount[NUM_LEDS];
const char* ssid = "XXX"; // WIFI name
const char* password = "XXXXXXXX"; //WiFi password
I only changed the Number of LED's and Settings for my WIFI.
On the Picture I illustrated how my hardware looks like.
Maybe you can tell me what I've done wrong.
You do not have the required permissions to view the files attached to this post.