If You mess up HDMI Calibration (adc/wb - in service menu) by accident here is a short tip how to quick and successfully re-calibrate HDMI - without any additional device (no pc, dvd, bd, ps3 etc).
In the Service menu go to :
SVC -> TEST PATTERN ->HDMI PATTERN SEL-> set to 7
Fullscreen Checkerboard should appear on Your TV.
Go back to main screen of service menu
Go to
ADC/WB->ADC->HDNMI CALLIBRATION... and put left or right arrow on remote.
After few seconds it will end with success.
Regards !
ES7000 HDMI Calibration TIP !
ES7000 HDMI Calibration TIP !
Last edited by vanisz on Thu Apr 04, 2013 6:03 pm, edited 1 time in total.
Re: ES7000 HDMI Calibration TIP !
Thanks. Should we add this to wiki?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: ES7000 HDMI Calibration TIP !
It is quite useful.This helped me few times. Please add this.
Re: ES7000 HDMI Calibration TIP !
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: ES7000 HDMI Calibration TIP !
Well thanks, it helped me a lot 2 mins ago!
-
- Posts: 4
- Joined: Tue Sep 17, 2013 8:25 pm
Re: ES7000 HDMI Calibration TIP !
I just bought a UN46F6400 and messed up with HDMI CALIBRATION (accidently use left arrow :-/)...
I did SVC...TEST PATTERN...HDMI PATTERN SET...arrow right (here) until reach number 7...I waited sometime, but nothing happened. So, I continued with the following instrucitions...but, the failure message appeared once again.
Any tip?
Regards!
I did SVC...TEST PATTERN...HDMI PATTERN SET...arrow right (here) until reach number 7...I waited sometime, but nothing happened. So, I continued with the following instrucitions...but, the failure message appeared once again.
Any tip?
Regards!
-
- Posts: 4
- Joined: Tue Sep 17, 2013 8:25 pm
Re: ES7000 HDMI Calibration TIP !
It was solved the problem above...but in the old fashion way: hdmi + notebook + f6400 hdmi source. Squared image (black and white)...and worked perfectly.luyznascimento wrote:I just bought a UN46F6400 and messed up with HDMI CALIBRATION (accidently use left arrow :-/)...
I did SVC...TEST PATTERN...HDMI PATTERN SET...arrow right (here) until reach number 7...I waited sometime, but nothing happened. So, I continued with the following instrucitions...but, the failure message appeared once again.
Any tip?
Regards!
Re: ES7000 HDMI Calibration TIP !
Can you please tell me which steps have you done and which pattern do you used? I'm trying to make the same on my HU7500 but the calibration continue to failure...
Thanks in advance!
Thanks in advance!