Code: Select all
"forwarder" :
{
"proto" : ["192.168.1.70:19445"],
"json" : ["192.168.1.70:19444"]
},
Code: Select all
"forwarder" :
{
"proto" : ["192.168.1.70:19445"],
"json" : ["192.168.1.70:19444"]
},
So if I enter the address of the hyperion installed and running on my Raspberry Pi or PC, can I make the settings for the LEDs placed on the TV?rakuri wrote: ↑Thu Nov 23, 2023 2:10 am As i said.. forwarder...
Code: Select all
"forwarder" : { "proto" : ["192.168.1.70:19445"], "json" : ["192.168.1.70:19444"] },
Code: Select all
+ case $1 in
+ /opt/storage/usb/sda1/SamyGO/hyperion/hyperiond.sh /opt/storage/usb/sda1/SamyGO/hyperion/etc/hyperion/hyp.samygo.json
Hyperion Ambilight Deamon (20361)
Version : sambilight (bugficks@samygo-e055502/fe13ff3-1535313862
Build Time: Sep 6 2018 19:35:47
INFO: Selected configuration file: /opt/storage/usb/sda1/SamyGO/hyperion/etc/hyperion/hyp.samygo.json
HYPERION INFO: ColorTransform 'default' => [0; 99]
HYPERION INFO: ColorCorrection 'default' => [0; 99]
HYPERION INFO: ColorAdjustment 'default' => [0; 99]
LEDDEVICE INFO: configuration:
{
"name" : "Myhyperionfig",
"output" : "192.168.1.98:5568",
"type" : "udp-e131"
}
HYPERION INFO: Json forward to 192.168.1.98:19444
HYPERION INFO: Proto forward to 192.168.1.98:19445
INFO: Creating linear smoothing
HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
EFFECTENGINE ERROR: no effects found, check your effect directories
EFFECTENGINE INFO: Initializing Python interpreter
INFO: Hyperion started and initialised
INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
EFFECTENGINE ERROR: effect Rainbow swirl fast not found
failed
INFO: Json server created and started on port 19444
PROTOCONNECTION INFO: Connecting to Hyperion: 192.168.1.98:19445
INFO: Proto server created and started on port 19445
INFO: Boblight server created and started on port 19333
ERROR: The v4l2 grabber can not be instantiated, because it has been left out from the build
BLACKBORDER INFO: threshold set to 0 (0)
BLACKBORDER INFO: mode:default
INFO: TizenTV grabber created and started
PROTOCONNECTION INFO: Connected to Hyperion: 192.168.1.98:19445
BORDER SWITCH REQUIRED!!
CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0