SamyGO Extensions found only one samba sever

Here for general support for B series TVs, request and problem solve area.

muck2009
Posts: 7
Joined: Wed Aug 24, 2011 8:16 am

SamyGO Extensions found only one samba sever

Post by muck2009 » Wed Aug 24, 2011 12:02 pm

hi am new in this forum and my english is very bad.
My tv is le 46 b650 with patched 2004.1 firmware
and my problem is i have 3 samba mount but only one is fount at same time
all three server alone are found if only one is on
i have test same user and pw at all server ip are 192.168.178.1 192.168.178.150 and 192.168.178.50 but i have no ip in the skipt.
at last i test it with last version off SamyGO Extensions and now the nfs servers are gone but that is only a litle problem

please help me

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: SamyGO Extensions found only one samba sever

Post by juusso » Wed Aug 24, 2011 1:15 pm

Edit the samba.init file
(SamyGO/etc/init.d/samba.init) and add static your servers IP. Change code:

Code: Select all

SERVER=""
# SERVER="10.0.0.1" # if you want a fixed server
to:

Code: Select all

#SERVER=""
SERVER="192.168.178.1 192.168.178.150 192.168.178.50" # if you want a fixed server
I don`t remember are here comas needed between IP addresses or not... :?:
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

muck2009
Posts: 7
Joined: Wed Aug 24, 2011 8:16 am

Re: SamyGO Extensions found only one samba sever

Post by muck2009 » Wed Aug 24, 2011 8:38 pm

hi thanks for your help but it do not work
i have tested

Code: Select all

DEST_DIR=$MOUNT_PATH/smb
SERVER=""
# SERVER="192.168.178.1 192.168.178.150"     #only 192.168.178.150 is found after i long time
# SERVER="192.168.178.1,192.168.178.150"       #nothing is found
# SERVER="192.168.178.1, 192.168.178.150"   #nothing is found
# SERVER="192.168.178.150" # if you want a fixed server
i have in all server same user and pw
if i change in server 192.168.178.150 the pw my samy found the 192.168.178.1 server
if i have 2 or more PW how must i write it

need help

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: SamyGO Extensions found only one samba sever

Post by juusso » Wed Aug 24, 2011 8:44 pm

# at the beginning means this is skipped. Leave only one row as i showed you. In this case comment out the first row!
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

muck2009
Posts: 7
Joined: Wed Aug 24, 2011 8:16 am

Re: SamyGO Extensions found only one samba sever

Post by muck2009 » Wed Aug 24, 2011 8:49 pm

no hi thanks for your help but it do not work
i have tested
DEST_DIR=$MOUNT_PATH/smb
# SERVER=""
SERVER="192.168.178.1 192.168.178.150" #only 192.168.178.150 is found after i long time
# SERVER="192.168.178.1,192.168.178.150" #nothing is found
# SERVER="192.168.178.1, 192.168.178.150" #nothing is found
# SERVER="192.168.178.150" # if you want a fixed server
next test


DEST_DIR=$MOUNT_PATH/smb
# SERVER=""
# SERVER="192.168.178.1 192.168.178.150" #only 192.168.178.150 is found after i long time
SERVER="192.168.178.1,192.168.178.150" #nothing is found
# SERVER="192.168.178.1, 192.168.178.150" #nothing is found
# SERVER="192.168.178.150" # if you want a fixed server
next test


DEST_DIR=$MOUNT_PATH/smb
# SERVER=""
# SERVER="192.168.178.1 192.168.178.150" #only 192.168.178.150 is found after i long time
# SERVER="192.168.178.1,192.168.178.150" #nothing is found
SERVER="192.168.178.1, 192.168.178.150" #nothing is found
# SERVER="192.168.178.150" # if you want a fixed server

i have in all server same user and pw
if i change in server 192.168.178.150 the pw my samy found the 192.168.178.1 server
if i have 2 or more PW how must i write it

muck2009
Posts: 7
Joined: Wed Aug 24, 2011 8:16 am

Re: SamyGO Extensions found only one samba sever

Post by muck2009 » Wed Aug 24, 2011 9:04 pm

# at the beginning means this is skipped. Leave only one row as i showed you. In this case comment out the first row!
I now it and i change the # but it dont work

muck2009
Posts: 7
Joined: Wed Aug 24, 2011 8:16 am

Re: SamyGO Extensions found only one samba sever

Post by muck2009 » Wed Aug 24, 2011 9:21 pm

this is my samba.init

Code: Select all

#!/bin/sh
#
# ? Copyright 1996-2010, ZsoltTech.Com
#       by Ser Lev Arris <arris@ZsoltTech.Com>
#
#       donated for the SamyGo Project
#       http://samygo.sourceforge.net/
#
#       Version: SamyGO svn $Id$
#

. /dtv/SGO.env
# sleep 9
##### CHANGE MEEEEE !!!!! ######
USER="ftpuser"
PASSWD="xxxxxxx"
PERM="rw" # can be ro or rw
##### CHANGE MEEEEE END ######

[ -e /mtd_rwarea/smb_userdata ] && source /mtd_rwarea/smb_userdata

[ -z $USER ] && exit 1
[ -z $PASSWD ] && exit 1

DEST_DIR=$MOUNT_PATH/smb
SERVER="192.168.178.1 192.168.178.150"
# SERVER="192.168.178.1,192.168.178.150"
# SERVER="192.168.178.1, 192.168.178.150"
# SERVER="192.168.178.150" # if you want a fixed server
SHARES=""
FR_NAME="Samba Server"
# M_OPTS="rw,user=${USER},password=${PASSWD}"
M_OPTS="$PERM,user=${USER},password=${PASSWD},codepage=cp1250,iocharset=utf8"

SERVERS="Don't set me!!"

do_mount()
{
#		$(echo -e "[sdh]\nVendor : CifsMount\nProduct : $FR_NAME\n\
#Serial : Q80VQLFH\nDevpath : 8\nLun : 0\nMountDir : $DEST_DIR\nFileSystem : vfat\n" >> /dtv/usb/log)

	for i in $S_MOUNTS ; do
		i="$(echo -n $i | sed -e 's/SGOspace/ /g')"
		M_POINT="$DEST_DIR/$1/$(echo -n $i | sed -e "s/\\\$/_/g")"
		mkdir -p "$M_POINT" 
		if [ `cat /proc/mounts | grep -c "$M_POINT"` -lt "1" ] ; then	
			/bin/busybox mount -o "${M_OPTS}" -t cifs "//$1/$i" "$M_POINT"
		else
			echo "$M_POINT is mounted!"
		fi

	done
}

get_shares()
{
	echo "Search Shares" 
	for i in $SERVERS ; do
	echo "on: $i" 
		S_MOUNTS=$(smbclient -s "$SYSROOT/etc/samba/smb.conf" -U ${USER}%${PASSWD} \
		-g -L $i | grep "Disk|" | grep -v "\\$" | grep -v " Service" | sed -r 's/.*\|(.*)\|.*/\1/' | sed -r 's/ /SGOspace/g')	
		# -g -L $i | grep "Disk|" | grep -v "\\$" | grep -v " Service" | cut -d "|" -f2)	
	[ -n "$S_MOUNTS" ] && do_mount $i
	done
}

get_servers()
{
	if [ -z "$SERVER" ] ; then
		# SERVERS=$(cat /proc/net/arp | grep -v "IP address" | cut -d " " -f1)
		SERVERS=$(cat /proc/net/arp | grep -v "IP address" | sed 's/^\(\w*.\w*.\w*.\w*\) *.*/\1/')
	else
		SERVERS=$SERVER
	fi
}

case $1 in 
	start)
	insmod $MOD_DIR/kernel/fs/cifs/cifs.ko
	mkdir -p "$DEST_DIR"
	get_servers
	get_shares
	;;
	stop)
	# may can fail if device access the mount from content library
	# for i in $(cat /proc/mounts | grep cifs | cut -d " " -f2) ; do
	for i in $(cat /proc/mounts | grep cifs | grep "$DEST_DIR" | sed 's/^\(.*\) \(.*\) cifs .*/\2/') ; do
		i="$(echo -n $i | sed -r 's/\\040/ /g')"
		/bin/busybox umount "$i"
	done
	;;
	status)
	/bin/mount | grep "$DEST_DIR"
	;;
	*)
	echo "Usage: $0 {start|stop}" 1>&2
	exit 0
	;;
esac
my samy only find the 192.168.178.150 sever
i have in all server same user and pw
if i change in server 192.168.178.150 the pw my samy found the 192.168.178.1 server
if i have 2 or more PW how must i write it

Code: Select all

. /dtv/SGO.env
# sleep 9
##### CHANGE MEEEEE !!!!! ######
USER="ftpuser"  #???????????
PASSWD="xxxxxxx" # ????????
PERM="rw" # can be ro or rw
##### CHANGE MEEEEE END ######

arris69
Official SamyGO Developer
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: SamyGO Extensions found only one samba sever

Post by arris69 » Thu Aug 25, 2011 9:49 am

SERVER can be just one entry

if you like to set multiple then in SERVERS (but it shouldn't be required) better turn off the windows firewall.

hth
arris

cocof2001
Posts: 2
Joined: Fri Jun 01, 2012 9:10 am

Re: SamyGO Extensions found only one samba sever

Post by cocof2001 » Fri Jun 01, 2012 9:14 am

Hi arris69,

How exactly am I to change the SERVERS section to be able to use multiple smb shares?


Thank you,
Florian

c74k
Posts: 105
Joined: Tue May 04, 2010 7:45 pm

Re: SamyGO Extensions found only one samba sever

Post by c74k » Sat Jun 02, 2012 7:49 pm

on your place I would try the other solution
use NFS server - are you edit /etc/exports
# /etc/exports: the access control list for filesystems which may be
# exported
# to NFS clients. See exports(5).
#
# Example for NFSv2 and NFSv3:
# /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check)
#
# Example for NFSv4:
# /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check)
# /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check)
#

/DLNA * (ro)
copy 03_03_nfsmount.init to 03_04_nfsmount.init and 03_05_nfsmount.init and edit file and setup all data

Post Reply

Return to “[B] Support”