[How-To] Alternatives of Samsung WiFi Link Stick
- erdem_ua
- SamyGO Admin
- Posts: 3125
- Joined: Thu Oct 01, 2009 6:02 am
- Location: Istanbul, Turkey
- Contact:
Re: Alternatives of Samsung WiFi Link Stick
injecting to squash FS also will break OS independency. For thoughts on this, I open a topic on General forum. Thanks
Re: Alternatives of Samsung WiFi Link Stick
Doesn't work for me. Just can post what dmesg says:
Regards
Hubert
Code: Select all
<6>usb 2-1: new high speed USB device using ehci-s5h2x and address 2
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>usb 2-1: USB disconnect, address 2
<1>[SERIAL INPUT MANAGE] Managed tty_struct(.name:ptm1) Setup!!!
<1>[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
<1>[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)
<1>
<6>usbcore: deregistering driver rt2870
<4><--- rtusb 2870 1.001(1.4.0.0) exit
<6>usbcore: deregistering driver rt73
<4><=== rtusb 0.994 exit
<6>usb 2-1: new high speed USB device using ehci-s5h2x and address 3
<6>usb 2-1: configuration #1 chosen from 1 choice
<4>rtusb 2870 1.002(1.4.0.0) [SamyGO] init --->
<7>
<4>
<4>=== pAd = d30a1000, size = 568816 ===
<4>
<4><-- RTMPAllocAdapterBlock, Status=0
<6>usbcore: registered new driver rt2870
Hubert
TV: UE46ES8090 T-ECPDEUC-2007.0
-
- Official SamyGO Developer
- Posts: 1700
- Joined: Fri Oct 02, 2009 8:52 am
- Location: Austria/Vienna (no Kangaroos here)
- Contact:
Re: Alternatives of Samsung WiFi Link Stick
output of:hubecker wrote:Doesn't work for me. Just can post what dmesg says:
...
Regards
Hubert
Code: Select all
cat /sys/bus/usb/devices/usb4/subsystem/drivers/rt2870/*/*
Code: Select all
cat /sys/bus/usb/devices/usb4/subsystem/drivers/rt73/*/*
arris
- erdem_ua
- SamyGO Admin
- Posts: 3125
- Joined: Thu Oct 01, 2009 6:02 am
- Location: Istanbul, Turkey
- Contact:
Re: Alternatives of Samsung WiFi Link Stick
The problem with 13.th channel is that frequency forbidden for WiFi devices in US but EU. 1-11 channels will work on your devices. I didn't remember 12.th channel but that could be forbidden too.kluczus wrote:I have Linksys WUSB54GC and Motorola with dd-wrt, everything is working when I change wifi channel from 13 to 10 or 1. On channel 13 usb cannot find my AP.
How to make changes with modules pernament ?
So if you have problem with 13.th channel, than switch another channel that not used near of you. Channel "number" doesn't effect connection speed if no one use that channel nearby. Scan your location with tools like airodump and find clean channel for your network.
- erdem_ua
- SamyGO Admin
- Posts: 3125
- Joined: Thu Oct 01, 2009 6:02 am
- Location: Istanbul, Turkey
- Contact:
Re: Alternatives of Samsung WiFi Link Stick
If I can prepare native compiling toolchain properly, I willslawekxyz wrote:Hey Guys.
I have a Samsung TV LE40B650 and USB WiFi dongle Edimax EW-7718Un (RT2870 chipset, Vendor = 7392, ProdID = 7718). Is it possible you upgraded rt2870sta.ko file for this device ? I tried to do something myself, but ..... without results.
Thanks and BR.
Re: Alternatives of Samsung WiFi Link Stick
Loading the module rta2870sta.ko (from a usb device) works fine for my dlink dwa-140 dongle but after TV reboot, all changes are lost. How to install the new rta2870sta.ko file to the TV memory ??