Hell, i have a Samsung UE37D6200 and i changed the model in the service menue to use the PVR Function. Everything was good and works fine.
Today i have problems to with the remote, the tv dont answer. So i go into the Service Menue and do a Factory Reset.
After the TV starts and the SMART TV logo is on the screen, the red led is blinking 4 x and the screen is black.
One moment later the SMART TV logo shows again. So i think the TV is in a reeboot loop and i dont can access the SERVICE Menue.
Pleas help me.
D6200 Reboot Loop
Re: D6200 Reboot Loop
Make eeprom reset, then go to service menu and set back your model, type and so on.
http://wiki.samygo.tv/index.php5/UnBric ... PROM_Reset
http://wiki.samygo.tv/index.php5/UnBric ... PROM_Reset
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: D6200 Reboot Loop
But to reset the eeprom i Must Open the device. I loose my warranty right? And the reset solve my Problem?