[SOLVED] LE46B750 Brick?

[AtSchU]

Ok here they are.
I've got a problem with bml.dump_17 putty says only 2% done. Time isn't enough for extracting all.

[juusso]

Bad. You need to speed up the process. I think you need few more seconds for that. Can you do everything more quickly?
oops, not 17, but 20 partition. Everything fine! Please make dump of bml0/20

Code: Select all

bml.dump /dev/bml0/20 /dtv/usb/sda1/bml_20.dmp

At this time i will check files you gave me.

[AtSchU]

Here you go

BTW thank you for your effort and your time putting in here

[juusso]

I think i know the diagnosis. Soon will be solution.

Edit: Here is it!: Download

bml_19_mod.zip

Code: Select all

bml.restore /dev/bml0/19 /dtv/usb/sda1/bml_19_mod.dmp

After next reboot TV should be alive. After this remove game "Activate Alternative Firmware", you don`t need it anymore. Don`t touch Telnet enabler and Samygo horse!.

[AtSchU]

Ok downloaded Zip File and extracted the file in it on my USB Drive
then connected USB to TV and started Telnet.
In putty I entered command

Code: Select all

bml.restore /dev/bml0/19 /dtv/usb/sda1/bml_19_mod.dmp

putty reports after that:
"Selected Flex-OneNAND device and 19 partition
100%
All of the flash memory units have been restored successfully"

But TV still shuts down.

[juusso]

The try same, just make sync after all.

Code: Select all

bml.restore /dev/bml0/19 /dtv/usb/sda1/bml_19_mod.dmp

sync

sync

and please, attach first screen of your service menu window.

[AtSchU]

doesn't work

[juusso]

and please, attach first screen of your service menu window.

[AtSchU]

give me 2 minutes

[juusso]

I asked you to take picture to be sure you`re with T-CHLCIPDEUC-2006.0
Strange issue. I can`t check do partitions match their hashes we added to bml0/19, because here is no time to make dumps.
Now you will switch to firmware T-CHLCIPDEUC-2008.2 trough menu (possible?) -help- software upgrade - alternative firmware should be not greyed. OK?