I need some help from you, because didn't find a reason that causes my problem with UE32B600 samsung tv...
At least one year ago I patched the firmware of my samsung with samygo firmware to enable telnet and network through USB-dongle or USB-ethernet adaptor, I built my ex-link cable and my own Samygo.sh script to start telnet daemon and mount NFS shared folder for play LAN videos. I did it following the wiki and it worked fine and I was happy...
Two or three weeks ago I did a modification on Samygo.sh to change some parameters like host, NFS folder or similar... ((I don't remember very well) and something went wrong because after this, the network adapter doesn't work more, and if I haven't network I have nothing at all..
now I don't have a PC with COM port so I couldn't use my exlink cable and get a terminal with TV ... the normal function on TV goes working fine... except for network that it was enabled.
Today, one friend give me a USB-COM adaptor, so now I have a complete exlink cable with USB-COM & COM-minijack, and I can connet with my tv, in theory, because in the practice I can't get a terminal connection... I follow the wiki procedure:
OK. When TV starts the startup.log appears on my console showing a lot of messages and ends with...On a Linux PC, install 'cu' (call up) tool from the uucp package and run
cu -l /dev/ttyUSB0 -s 115200
Code: Select all
@@@@@@@@@@@@USBEventHandler => Start@@@@@@@@@@@@@@@@@@@@@
USBEventHandler Init
USB : From now, no more insmod
[DEV_BOOTON ] [static void* UsbMountService::do_UsbFault(void*)] do_UsbFault ======== START ========
[DEV_BOOTON ] [static void* UsbMountService::do_UsbFault(void*)] TDBuilder::GetTDiSystem() success...
insmod: cannot insert `/mtd_boot/modules/usb_fault.ko': File exists (-1): File exists
[UsbMountService:: usb module exist already.. so do not insmod usb ]
USB : Exit Load USB module
PTP_API_Init() successfull
CSingleCECAppBase::t_Create() : 0 (1:RTL, 0:LTR)[bool CUSBAppEventHandler::Init() - 52]
USB Modules are already installed
1 (0): #### this : 264f1b8, pReceived : 2650604
DP_CPU_BLACK_CONTROL OFF
m_bOSDDisplay:0, m_bDynamicControlStatus:0, m_bSignalActivity:1, iSourceMode:201, ResInfo.IsPC:0
Connected.
Connected.
Disconnected.
so, Can you give me some clue about what it can be happening ??Enter "debug" at the invisible prompt ... to enable your serial console.
You should see something like below with each keystroke
[SERIAL INPUT MANAGE] 1-th ENABLE Magic serial input match!
...
...
...
[SERIAL INPUT MANAGE] serial input ENABLE!!!!!
the only thing that I have is the complete startup log in console, I read some fails with samygo.sh script (It's normal because network is not running) but I can't understand more and I don't know why the hyperterminal isn't working at this moment...
thanks for your help people; It's all I can say for now