Good morning, perhaps putting his hand to the services menu I touched something wrong I have a problem in my UE46ES7000 firmware 2005. when I go to put the TV in standby mode disables the network card and also the wifi. You ideea where I can intervene to maintain the LAN and WIFI function enabled?
thanks
UE46ES7000 ethernet and wifi stand-by
Re: UE46ES7000 ethernet and wifi stand-by
Hi Steno, I made a test on my TV and I am sure not to have altered the service men? (a part watch dog = OFF and Serial = debug).
I could only test the Wi-fi because I do not have a wired lan to the TV.
When the TV is std-by , the wi-fi is down as well and there is no connection to the router.
I guess the same is applicable to the Ethernet card.
This because the ES series has a very low power consumption in std-by and therefore all these services shall remain off.
This is of course a limitation for several need but I think it is a good compromise for the standard user.
May be it is possible to switch them on but in this case a small CPU making the control of the function shall run.
Ciao
miazza
I could only test the Wi-fi because I do not have a wired lan to the TV.
When the TV is std-by , the wi-fi is down as well and there is no connection to the router.
I guess the same is applicable to the Ethernet card.
This because the ES series has a very low power consumption in std-by and therefore all these services shall remain off.
This is of course a limitation for several need but I think it is a good compromise for the standard user.
May be it is possible to switch them on but in this case a small CPU making the control of the function shall run.
Ciao
miazza
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.
Re: UE46ES7000 ethernet and wifi stand-by
just to confirm that with LAN, same thing without disabling anything in SM... All services are off when TV is in Std-By mode.