frimware ansd pvr ue46c5700

Here is information about customize your C series firmware..:!:This forum is NOT FOR DUMMY USERS questions or problems but DEVELOPER.
Post Reply

frankxx
Posts: 5
Joined: Fri Jan 03, 2014 3:38 pm

frimware ansd pvr ue46c5700

Post by frankxx »

hi,

First my english is very bad. Sorry.
i have a samsung ue 46c5700.
i tryed to switch on pvr at the service men?. it is on but no pvr funktion over the remote contol.
The new hdd western digigtal elements 500gb Usb 3.0 kompatible with usb 2..
if there a firmware for this tv with enabled pvr .
My firmware is T-MSX5DEUC_2011.0.

Thanks for help
User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: frimware ansd pvr ue46c5700

Post by beatfreak »

hi frankxx, if you are from germany, send a PM

has the popup message, when you press play / pause / rec on your remote control, changed after you have set PVR support to ON ? and have you checked that this is still set to on and has not switched back?
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.
frankxx
Posts: 5
Joined: Fri Jan 03, 2014 3:38 pm

Re: frimware ansd pvr ue46c5700

Post by frankxx »

hi beatfrek.

yes i have the pvr on at hte service men? twice again.
if i press some button at the remote control ( play / forward or reverse ), is there the massage in germany "nicht verf?gbar" .
If i press the record button is there no funktion.
hdd exiast at the media play men?. To watch films or pictues from the hdd.

thanks
User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: frimware ansd pvr ue46c5700

Post by beatfreak »

so if you open media.p you have no additional option "TV-Aufzeichnung" and if you go into service menu again PVR is already set to ON ?
wenn die option aktiviert ist und er dir immernoch kein pvr anbietet dann fehlt in deriner firmware wohl das st?ck software zum aufzeichnen.

http://wiki.samygo.tv/index.php5/Compat ... series_TVs
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.
frankxx
Posts: 5
Joined: Fri Jan 03, 2014 3:38 pm

Re: frimware ansd pvr ue46c5700

Post by frankxx »

Hi

ich scheine wohl in deutsc schreiben zu k??nen .... puhhh... danke !
Ja genau im media play erscheint kein "tv Aufzeichnungen".
Ich habe es mehrfach im service men? ?berpr?ft ob pvr auf on steht. JA TUT ES !!!!!
Aber keinerlei funktion. schade.
Da mien enlgisch nicht so gut ist . hatte ich die frage ob ich irgend eine andere firmware f?r den tv nutzen kann von mir auch gern ne custiom firmware.
denn desweiteren hat mein tv die ganze internet geschichte nicht.

aber danke erstmal f?r die antworten

gruss frankxx
frankxx
Posts: 5
Joined: Fri Jan 03, 2014 3:38 pm

Re: frimware ansd pvr ue46c5700

Post by frankxx »

hi .

Also wenn ich mir die tabelle anschaue passt mein tv nirgends dahinein.
weder die modell nummer 5xxxx (andere firmware) noch nach firmware dann sind es andere modelle, und w?rde der uexxc6000 an ehesten passen.
kann es sein das der tv eine c6000 serie ist aber nur als 5700 ageboten wurde.
wass kann pasieren wenn ich eine firmware der 6000 serei aufspiele? bzw laut der tabelle kann man dir der modell?nderung im service men? die ganzen funktionen freischalten.
Ich weiss das es de tv auch in dieser bezeichnung mit internet@tv geben soll.

gruss frankxx
frankxx
Posts: 5
Joined: Fri Jan 03, 2014 3:38 pm

Re: frimware ansd pvr ue46c5700

Post by frankxx »

ok hi @all.

can i change the modellnumber uc5700 to uc 6000 or uc6600 or uc 6900 to get mot features, like pvr and internt @tv.
can i change the firmawae from T-MSX5DEUC_2011.0 to T-VAL6DEUC to get more features or something.

Post Reply

Return to “[C] Firmware”