So a small crew driver would do?
But I'm not sure where to find the proper chip on the mainboard. Can you maybe point me to the right one?
Mainboard replace: c530/550 and c630 TO c650/c679, get PVR !
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
are you sure you have connected LVDS cable in proper way?
p.s. eeprom should be marked one on http://wiki.samygo.tv/images/d/d5/UA40C6200_full.jpg (you have same board, just with some more components on it, like CI interface...)
p.s. eeprom should be marked one on http://wiki.samygo.tv/images/d/d5/UA40C6200_full.jpg (you have same board, just with some more components on it, like CI interface...)
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
Yeah, it wasn't connected yet in the picture above
Is the EEPROM location identical to the C6200 example in the wiki?
Is the EEPROM location identical to the C6200 example in the wiki?
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
you should understand, i can just guess... I think yes.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
Ok, just used a test pin to short circuit to two pins as marked in the wiki. But unfortunately the picture is still distorted and the tv is still stuck in the reboot loop.
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
I`m in doubts. Can be:
1. you haven`t proceed the eeprom reset procedure well and it didn`t worked. Possible even if proper made eeprom resed won`t help
2. Possible, that this board is not compatible to other hardware on TV (LVDS?)
3. Mainboard you got is damaged
You should search local serviceman to check it... I can`t help, this issue is out of my knowledge. apologies.
Maybe other our users have ideas?
@ sbav1?
1. you haven`t proceed the eeprom reset procedure well and it didn`t worked. Possible even if proper made eeprom resed won`t help
2. Possible, that this board is not compatible to other hardware on TV (LVDS?)
3. Mainboard you got is damaged
You should search local serviceman to check it... I can`t help, this issue is out of my knowledge. apologies.
Maybe other our users have ideas?
@ sbav1?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
No problem, you're just trying to help and I'm thankful for that.
I've put the original board back in and that one works right away.
Just a question concerning the reset process: Do the two pins have to be connected before the tv is connected to the power grid?
I've put the original board back in and that one works right away.
Just a question concerning the reset process: Do the two pins have to be connected before the tv is connected to the power grid?
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
Yes, you have
-unplug from power
-connect two pins (sometimes there is no contact - pins may be coated) and keep it connected
-power tv and wait until LCD is light up
-release pins
-use remote control to power tv off to standby mode
-info menu mute power to get it direct to service menu
-unplug from power
-connect two pins (sometimes there is no contact - pins may be coated) and keep it connected
-power tv and wait until LCD is light up
-release pins
-use remote control to power tv off to standby mode
-info menu mute power to get it direct to service menu
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
That's too bad. Just did another reset but with the same results.
Any guess as to what might be the cause of this incompatibility? The difference in screen size between the UE40 and my UE46?
Any guess as to what might be the cause of this incompatibility? The difference in screen size between the UE40 and my UE46?
Re: Mainboard replace: c530/550 and c630 TO c650/c679, get P
Just an follow up question: What would be an alternative for me now? Get the exact same board type that others here have successfully used to upgrade from UExxC6000?