bricked LA46A550P1 help!!

[madmike]

hi newbee here
I've got a LA46A500 this is bricked I did this by changing the settings in the service menu not knowing what i was doing
power on 7 blinks of the standby led black screen and after about a minute it restarts and repeats over and over
1-tryed the eeprom chip tick on the only 8 pin eeprom on the main board- didnt work
2-this board is a mt8226 so tried re-flashing with MtkTool and when i hit the flash button it says "baudRate AutoSet Fail! Please reset the target board" and the baud rateis set to 115200
3-trying to work with putty. I've communication with the board but it restarts before I can do anything meaningful

has anyone got any experience with a A550 board that can help, would be appreciated

[juusso]

i think your brick should be repairably by eeprom reset. You have to identify SoC eeprom and make short connection on it.

http://wiki.samygo.tv/index.php5/UnBric ... PROM_Reset

[madmike]

tried eeprom reset on the only eeprom on the board (i have the diagram) and didn't do any thing. so going to put a 37A550 board in hope it will work