[App] Disable recordings encryption patch (E-MST only)

[sectroyer]

Code: Select all

Disable encoding for record patch v0.1
Patching done!

Use code bbcode for console dumps

[zoelechat]

Ok, so if you're not able to record, even less unencrypted, it means patch doesn't work on non-MST. Sorry, 1st post already edited

[francuccio]

Too bad ... we hope we can solve

[zoelechat]

Too bad ... we hope we can solve

You can still use PVRdecoder to decrypt your recordings, or get PVRtoTS (donor's only though)

[francuccio]

You tell me how to get it?
Thank You

[zoelechat]

• PVRdecoder
• PVRtoTS available for donors only, means needs donation

[francuccio]

With PVRtoTS can also record from encrypted channels?

[zoelechat]

With PVRtoTS can also record from encrypted channels?

PVRtoTS doesn't change anything to TV behavior at this level, you might try this other patch: [App] Allow recording from CI/satellite patch
If this one works yes (check if TV allow to record encrypted channels after patching), else no.

[kulica]

I've patched my ES6100 series and it works OK. Now the fun part. I've tried with PVR decoder to access files on the USB stick, but I don't know what happens, TV suddenly loses root and it's impossible to reconnect. When I manually run samygo in Smart something it works again.
After re-enabling it it works just fine. Now my linux skills come in handy. I didn?t know where the USB key is mounted, thus I ran cat /proc/mounts command, which yielded information that the USB key should be mounted as /dev/sda1 /dtv/usb/sda1 xfs rw,noexec,relatime,nouuid,attr2,noquota 0 0. So let?s go into that directory and try to find out where the movie is stored.

Code: Select all

root@tv:/dtv/usb/sda1/CONTENTS # ls
20150130130738.inf  20150130130738.mta  20150130130738.ss   NewBoard.ss
20150130130738.mdb  20150130130738.srf  20360316151138.key

As you can see there are files on the stick. Probably the largest should be the video I was looking for. Therefore I fired up FileZilla and went into that directory. In the OP the author says that you would probably need to rename the video file extension to .ts. That?s what I?ve done. But the windows player disagrees with me with the fallowing message:
File Source (Async.)::Output

Code: Select all

Media Type 0:
--------------------------
Unknown

AM_MEDIA_TYPE: 
majortype: MEDIATYPE_Stream {E436EB83-524F-11CE-9F53-0020AF0BA770}
subtype: MEDIASUBTYPE_MPEG2_TRANSPORT {E06D8023-DB46-11CF-B4D1-00805F6CBBEA}
formattype: TIME_FORMAT_NONE {00000000-0000-0000-0000-000000000000}
bFixedSizeSamples: 1
bTemporalCompression: 0
lSampleSize: 1
cbFormat: 0

Any ideas? It seems to me, that this is still encrypted.

EDIT: It suddenly works now. Never mind. I think there's a huge start-up delay with patching. You have to wait at least a full minute. I also have found out that you can simply transfer these files over samba share, and that is a quite convenient.

Thanks to the author .