I'm trying to root Bluray BDP-F7500-ZF with BSP-F7500WWB-1020.0 software on it.
Using the instructions in this thread.
Plugged USB in, started SamyGO App in smarthub
Rebooted bluray player, while leaving usb in place.
Started Smarthub, started Webbrowser.
No root, still can't telnet to any of the give ports.
What else to try?
[App] Rooting E, F (and H?) Bluray
Re: [App] Rooting E and F Bluray
You do not have the required permissions to view the files attached to this post.
Re: [App] Rooting E and F Bluray
Yeah. Looks this root didn't work for you 
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [App] Rooting E and F Bluray
Is there any other root available to try?
Re: [App] Rooting E and F Bluray
Not yet.megapearl wrote:Is there any other root available to try?
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [App] Rooting E and F Bluray
How can you tell from that picture? I have BD-F7500/XE and 1020. Works for me...sectroyer wrote:Yeah. Looks this root didn't work for you
Re: [App] Rooting E and F Bluray
Well I have good eyesightJeppeTh wrote:How can you tell from that picture? I have BD-F7500/XE and 1020. Works for me...sectroyer wrote:Yeah. Looks this root didn't work for you
Anyway I assume he tried "more than once" But if he did try only once than maybe it works for him 
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [App] Rooting E and F Bluray
Tried it again using different usb stick, (removed the samygo app from smarthub first) and tried again.
Same result, except now the last four lines are red instead of the last five.
Tried it 4 times, same result and ports are still closed.
From FreeBSD server in same subnet:
Starting Nmap 6.47 ( http://nmap.org ) at 2015-07-02 21:18 CEST
Nmap scan report for bluray (10.0.0.27)
Host is up (0.00093s latency).
Not shown: 996 closed ports
PORT STATE SERVICE
6000/tcp open X11
7676/tcp open imqbrokerd
8080/tcp open http-proxy
8443/tcp open https-alt
MAC Address: 24:4B:03:0E:07:E7 (Unknown)
Nmap done: 1 IP address (1 host up) scanned in 0.45 seconds
root@donald:/ # nmap -sT bluray.flissinger.local
Starting Nmap 6.47 ( http://nmap.org ) at 2015-07-02 21:18 CEST
Nmap scan report for bluray.flissinger.local (10.0.0.27)
Host is up (0.00096s latency).
rDNS record for 10.0.0.27: bluray
Not shown: 996 closed ports
PORT STATE SERVICE
6000/tcp open X11
7676/tcp open imqbrokerd
8080/tcp open http-proxy
8443/tcp open https-alt
MAC Address: 24:4B:03:0E:07:E7 (Unknown)
Nmap done: 1 IP address (1 host up) scanned in 0.43 seconds
root@donald:/ # telnet bluray.flissinger.local 1023
Trying 10.0.0.27...
telnet: connect to address 10.0.0.27: Connection refused
telnet: Unable to connect to remote host
root@donald:/ # telnet bluray.flissinger.local 2023
Trying 10.0.0.27...
telnet: connect to address 10.0.0.27: Connection refused
telnet: Unable to connect to remote host
root@donald:/ # telnet bluray.flissinger.local 5023
Trying 10.0.0.27...
telnet: connect to address 10.0.0.27: Connection refused
telnet: Unable to connect to remote host
root@donald:/ #
What else can I try?
Same result, except now the last four lines are red instead of the last five.
Tried it 4 times, same result and ports are still closed.
From FreeBSD server in same subnet:
Starting Nmap 6.47 ( http://nmap.org ) at 2015-07-02 21:18 CEST
Nmap scan report for bluray (10.0.0.27)
Host is up (0.00093s latency).
Not shown: 996 closed ports
PORT STATE SERVICE
6000/tcp open X11
7676/tcp open imqbrokerd
8080/tcp open http-proxy
8443/tcp open https-alt
MAC Address: 24:4B:03:0E:07:E7 (Unknown)
Nmap done: 1 IP address (1 host up) scanned in 0.45 seconds
root@donald:/ # nmap -sT bluray.flissinger.local
Starting Nmap 6.47 ( http://nmap.org ) at 2015-07-02 21:18 CEST
Nmap scan report for bluray.flissinger.local (10.0.0.27)
Host is up (0.00096s latency).
rDNS record for 10.0.0.27: bluray
Not shown: 996 closed ports
PORT STATE SERVICE
6000/tcp open X11
7676/tcp open imqbrokerd
8080/tcp open http-proxy
8443/tcp open https-alt
MAC Address: 24:4B:03:0E:07:E7 (Unknown)
Nmap done: 1 IP address (1 host up) scanned in 0.43 seconds
root@donald:/ # telnet bluray.flissinger.local 1023
Trying 10.0.0.27...
telnet: connect to address 10.0.0.27: Connection refused
telnet: Unable to connect to remote host
root@donald:/ # telnet bluray.flissinger.local 2023
Trying 10.0.0.27...
telnet: connect to address 10.0.0.27: Connection refused
telnet: Unable to connect to remote host
root@donald:/ # telnet bluray.flissinger.local 5023
Trying 10.0.0.27...
telnet: connect to address 10.0.0.27: Connection refused
telnet: Unable to connect to remote host
root@donald:/ #
What else can I try?
Re: [App] Rooting E and F Bluray
hmmm, maybe it simply didn't work...
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [App] Rooting E and F Bluray
What do you mean by this? App should only be on stick?megapearl wrote:(removed the samygo app from smarthub first
Last edited by JeppeTh on Mon Jul 20, 2015 12:47 pm, edited 1 time in total.
Re: [App] Rooting E and F Bluray
I meant the 'shortcut' in the smarthub to the Samygo app on the USB stick.