[ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)

[tompl]

There is no Firmware 0000 for T-GFP9DEUC well i can't find one :/

[zoelechat]

Nope, you can only hope for future "root on *very* latest firmwares". Meanwhile, don't forget to disable updates...

[tompl]

Thanks for letting me know. I have disabled updates on the router as there is no option to turn it off in the service menu.

[JeppeTh]

It seems bluray firmware is named B-FB4HRDEUC, not really mentioned but I guess it may work anyhow then...

Some questions.
1. Is the rooting methods as safe as e.g. rooting method for f-series bluray? I.e. just remove USB when turned off and rooting is gone?
2. Is the "new skype" method the preferred rooting method? Or should I try the method in this thread?
3. The method in this thread requires wifi. Is that only while rooting? I.e is it possible to switch to LAN after root is enabled?
EDIT: realized there's a lan switch patch...

[JeppeTh]

I made it a try on my BD-H8900n (B-FB4HRDEUC according to samsung.com), but it failed.
Can you see why?

20160725_231350.jpg

SpoilerShow

nsmod_qca.sh

Code: Select all

echo " insmod_qca.sh begin"
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x37
echo " insmod_qca.sh end"

SpoilerShow

.cm0013

Code: Select all

CM_DEV_ID|1469480782

SpoilerShow

network_type_info.txt

Code: Select all

CurrentType=1

EDIT: And yes - I'm using wifi - forgot to switch to wireless at the first try though...

[sectroyer]

Yeah, all looks okay. Your Bluray IS rootable with newest (still WIP) rooting technique just will not work with the one you just tried because you did NOT block updates "on time". Now you should block them IMMEDIATELY, confirm blockade is working and wait for release which will work for you without ANY problems If you don't block you will NEVER get root working

P.S. You should also disable updates in normal menu

[JeppeTh]

Ok, thx. Any idea of when that "technique" will be "released"?

My attempts didn't leave any "harmful stuff" on the device right?

Is there any idea to try the "new skype" variant on this device? EDIT: Seems too much stuff not available on my bluray for trying that out.

[sectroyer]

Everything is okay, nothing "harmfull" left on TV

[sebausmd]

i followed the root steps ([!!!] Rooting H on latest firmwares), but i get some problems...
I`m on T_MST14DEUC-2740.6 firmware...


8. Press enter when you're asked, the widget will automatically finish installation then.
9. When it finishes it will ask to reboot TV.

when i press "ENTER" key,

SpoilerShow

IMAG1048.jpg

step 9 will run in a error and will not reboot...
i get error i should read root guide (please see picture in spoiler) , but i can`t find my mistake
also, i`m i little bit consused about Skype or not and what about the engine is in InstallSamyGO-H folder?!?

anyone can help me, please?

sorry, i must change the status... as not solved
i don`t know is my tv sucessfully rooted? - Telnet is NOT running... (port 3123) maybe can i repeat the procedure? (or i get a brick???) (reference see picture in spoiler...)
help me, please; one posts later i descripe my problem at step 12. THX

[sebausmd]

09. When it finishes it will ask to reboot TV. - I have done this
10. Reboot TV and wait 5 minutes. - I have wait... min 8 minutes...
11. Power OFF TV and UNPLUG USB. - ...
12. On PC check USB. You should see following files:

insmod_qca.sh OR insmod_bcm.sh - nothing to see / find
network_type_info.txt - nothing to see / find
wifi_vendor.txt - nothing to see / find
SamyGO/vermagic.txt (in some cases you might NOT see this file but if root is working do NOT worry)

Sorry, i need your help, please
TELNET (IP-adress for TV):3123 also NOT Work