Hi, I have a Samsung 32 inch ue32eh5300 tv (UK/european model). I accidentally changed my panel type in the settings and so I changed it back to the first one "32A1AF6E". My tv is working fine still but I'm not sure if this was the original setting.
Does any one know my panel type? Thanks
Also I have disabled otn support but my shitty router can't domain block . Is this okay?
Accidentally change panel type
Re: Accidentally change panel type
If your TV is 32 inch then panel type has to be 32xxxx. Just look here in forum for some service manual and you will see what options you have in panel type.Hayat555 wrote:Hi, I have a Samsung 32 inch ue32eh5300 tv (UK/european model). I accidentally changed my panel type in the settings and so I changed it back to the first one "32A1AF6E". My tv is working fine still but I'm not sure if this was the original setting.
Does any one know my panel type? Thanks
Also I have disabled otn support but my shitty router can't domain block . Is this okay?
UE48H6640 T-MST14DEUC 2781.0 root latestH --> 2130.0 skypeRoot-->0000-->2115.3 "Skype refueled" Root
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
Re: Accidentally change panel type
I couldn't find the ue32eh5300 service manual but today I changed the picture mode to movie and the whole screen became multicoloured and tv became unresponsive. I then went into settings and changed the panel type to 32R1A6FE. When I chose movie picture mode it was okay. But I'm not sure that this panel type was even the original setting?notengo13 wrote:If your TV is 32 inch then panel type has to be 32xxxx. Just look here in forum for some service manual and you will see what options you have in panel type.Hayat555 wrote:Hi, I have a Samsung 32 inch ue32eh5300 tv (UK/european model). I accidentally changed my panel type in the settings and so I changed it back to the first one "32A1AF6E". My tv is working fine still but I'm not sure if this was the original setting.
Does any one know my panel type? Thanks
Also I have disabled otn support but my shitty router can't domain block . Is this okay?
Re: Accidentally change panel type
I know that there is no excactly service manual for your TV. It s just for reference. What values can be there. Also you can check for libFactory to found some more values that can help you find out excactly which panel type you need for you TV.
UE48H6640 T-MST14DEUC 2781.0 root latestH --> 2130.0 skypeRoot-->0000-->2115.3 "Skype refueled" Root
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
Re: Accidentally change panel type
Maybe that could help: https://forum.samygo.tv/viewtopic.php?f=85&t=10323
*Randomly* I'd say: 32A6AF0E but if everything already looks correct, not sure it's worth a change
*Randomly* I'd say: 32A6AF0E but if everything already looks correct, not sure it's worth a change

I do NOT receive any PM. Please use forum.
Re: Accidentally change panel type
zoelechat wrote:Maybe that could help: https://forum.samygo.tv/viewtopic.php?f=85&t=10323
*Randomly* I'd say: 32A6AF0E but if everything already looks correct, not sure it's worth a change
Okay so there are three options: 32A1AF6E, 32R1AF6E or 32P1AF6E. When I choose 32A1AF6E or 32P1AF6E and set the picture mode to movie the tv becomes multi coloured and unresponsive. However, when I set it to movie mode on 32R1AF6E movie mode works and tv is responsive. I think this was the original setting. What do you think? Or am I just being paranoid lolnotengo13 wrote:I know that there is no excactly service manual for your TV. It s just for reference. What values can be there. Also you can check for libFactory to found some more values that can help you find out excactly which panel type you need for you TV.
Re: Accidentally change panel type
You didn't try my random valueHayat555 wrote:What do you think?

ps: your panel is 50Hz = no 3D
I do NOT receive any PM. Please use forum.
Re: Accidentally change panel type
It didn't give me that option???zoelechat wrote:You didn't try my random valueHayat555 wrote:What do you think?![]()
ps: your panel is 50Hz = no 3D
I'm getting a feeling of strong sarcasm here

Re: Accidentally change panel type
Sometimes happen but not nowHayat555 wrote:I'm getting a feeling of strong sarcasm here

I was just looking at possible values Factory log of similar TV/fw shows. Aren't they all available for selection?
Code: Select all
[Factory] 17 Type 33=40A1AF6E (def:0)
[Factory] -> 0=NONE
[Factory] -> 1=26R6AH0D
[Factory] -> 2=32A6AH0D
[Factory] -> 3=32R6AH0D
[Factory] -> 4=32P6AH0D
[Factory] -> 5=32A6AF0D
[Factory] -> 6=32R6AF0D
[Factory] -> 7=32P6AF0D
[Factory] -> 8=40A6AF0D
[Factory] -> 9=40R6AF0D
[Factory] -> 10=40P6AF0D
[Factory] -> 11=46A6AF0D
[Factory] -> 12=46R6AF0D
[Factory] -> 13=46P6AF0D
[Factory] -> 14=22A6TF1E
[Factory] -> 15=32A6AF0E
[Factory] -> 16=32R6AF0E
[Factory] -> 17=32P6AF0E
[Factory] -> 18=37P6AF0E
[Factory] -> 19=40A6AF0E
[Factory] -> 20=40R6AF0E
[Factory] -> 21=40P6AF0E
[Factory] -> 22=40A1AF0E
[Factory] -> 23=46A6AF0E
[Factory] -> 24=46R6AF0E
[Factory] -> 25=46P6AF0E
[Factory] -> 26=46A1AF0E
[Factory] -> 27=55A1AF0E
[Factory] -> 28=60H1AF0E
[Factory] -> 29=32A1AF6E
[Factory] -> 30=32R1AF6E
[Factory] -> 31=32P1AF6E
[Factory] -> 32=37P1AF6E
[Factory] -> 33=40A1AF6E
[Factory] -> 34=40R1AF6E
[Factory] -> 35=40P1AF6E
[Factory] -> 36=46A1AF6E
[Factory] -> 37=46R1AF6E
[Factory] -> 38=46P1AF6E
[Factory] -> 39=55A1AF6E
[Factory] -> 40=55R1AF6E
[Factory] -> 41=55P1AF6E
[Factory] -> 42=60H1AF6E
[Factory] -> 43=51EFHcD
[Factory] -> 44=51EFCrD
[Factory] -> 45=64ESHcD
[Factory] -> 46=60EFHcD
[Factory] -> 47=60ESCrD
[Factory] -> 48=64ESCrD
[Factory] -> 49=23A6TF0E
[Factory] -> 50=24L6TF1E
[Factory] -> 51=27A6TF0E
[Factory] -> 52=27L6TF0E
[Factory] -> 53=27D6TF0E
[Factory] -> 54=51ESCrD
[Factory] -> 55=40A2UF0E
[Factory] -> 56=46A2UF0E
[Factory] -> 57=55A2UF0E
[Factory] -> 58=60H2UF0E
[Factory] -> 59=50R6AF0E
[Factory] -> 60=50P6AF0D
[Factory] -> 61=32B6AH0D
[Factory] -> 62=50P1AF0D
[Factory] -> 63=50P1AF6E
[Factory] -> 64=50P6AF0E
[Factory] -> 65=50R1AF0D
[Factory] -> 66=50R1AF6E
[Factory] -> 67=50R2AF0E
[Factory] -> 68=65L1AF6E
[Factory] -> 69=65L2AF0E
[Factory] -> 70=65R1AF0D
[Factory] -> 71=50R6AF0D
[Factory] -> 72=50P1AF0E
[Factory] -> 73=40H6AF0D
[Factory] -> 74=40H6AF0E
[Factory] -> 75=37P6AF0D
[Factory] -> 76=50R1AF9E
[Factory] -> 77=22L6TF0E
[Factory] -> 78=50R1AF0E
[Factory] -> 79=22D6TF0E
[Factory] -> 80=26P6AH0D
[Factory] -> 81=55A2UF1E
[Factory] -> 82=32A6AF1D
[Factory] -> 83=40A6AF1D
[Factory] -> 84=46A6AF1D
[Factory] -> 85=50D6AF1D
[Factory] -> 86=50R6AF1D
[Factory] -> 87=55R1AF1D
[Factory] -> 88=60H1AF2D
[Factory] -> 89=55A1AF3D
I do NOT receive any PM. Please use forum.