Just wanted to tell you that it works with ES8090
Thanks:)
[App] libUSBPopDown (E/F/)H (prevent startup vusb popup)
Re: [App] libUSBPopDown (E/F/)H (prevent startup vusb popup)
Hi everyone! all did as the instructions. I turn on the TV, and after 90 seconds, the message "new hardware-the usb virtual", if nothing is pressed, the window will close, also about 90 seconds. I tried and libUSBPopDown.zip and libUSBPopUnder.zip the same result. How to turn it off for good? What am I doing wrong? Tell me please. In sam.log:
===========================
Starting UEP_killer.sh
===========================
+ ./etc/rc.sysinit
checking / dtv / usb / sda1
Injecting '/mnt/opt/privateer/usr/libso/libUSBPopDown_30s.so' resident: '0' succeeded.
real storage device at: / sys / block / sda / device / model (sda)
found gadget at: / sys / block / sdb / device / model
scsidev: sdb
my tv Samsung UE40F6400AK firmware T-MST12DEUC_1120.2
===========================
Starting UEP_killer.sh
===========================
+ ./etc/rc.sysinit
checking / dtv / usb / sda1
Injecting '/mnt/opt/privateer/usr/libso/libUSBPopDown_30s.so' resident: '0' succeeded.
real storage device at: / sys / block / sda / device / model (sda)
found gadget at: / sys / block / sdb / device / model
scsidev: sdb
my tv Samsung UE40F6400AK firmware T-MST12DEUC_1120.2
Samsung UE40F6400AK firmware T-MST12DEUC_1120.2
Re: [App] libUSBPopDown (E/F/)H (prevent startup vusb popup)
/dtv/USBPopDown.log or /dtv/USBPopUnder.log would help more
I do NOT receive any PM. Please use forum.
Re: [App] libUSBPopDown (E/F/)H (prevent startup vusb popup)
Hi Zoelechat,
I have an issue with libUSBPopDown_10.so or libUSBPopDown_30.so.
If either of the two .so is injected, the 'channel info' (the one on top of the TV) is sometimes not shown when I press the 'channel info' button.
The issue starts around the time I'm able to ssh to the TV - so it is around the time the .so is loaded. When I comment out the line, that loads the .so in /mnt/etc/init.d/02_04_vusb.init, and reboot TV, the issue is not present.
Is there any way I can troubleshoot this further?
I see some people mentioning libUSBPopUnder.so, but I could not find it elsewhere so that I can try it instead.
I see that the cmd line you put in this thread is:
samyGOso -A -B -l /mnt/opt/privateer/usr/libso/libUSBPopDown_30s.so,
whereas the cmd line in the default samygo 02_04_vusb.init is different (see below).
Thanks,
Peter
UE40H6470
T-MST14DEUC-2781.0 (downgraded from 2800.1 to 0000.0)
I have rooted it following this: https://forum.samygo.tv/viewtopic.php?f=70&t=9622
I have an issue with libUSBPopDown_10.so or libUSBPopDown_30.so.
If either of the two .so is injected, the 'channel info' (the one on top of the TV) is sometimes not shown when I press the 'channel info' button.
The issue starts around the time I'm able to ssh to the TV - so it is around the time the .so is loaded. When I comment out the line, that loads the .so in /mnt/etc/init.d/02_04_vusb.init, and reboot TV, the issue is not present.
Is there any way I can troubleshoot this further?
I see some people mentioning libUSBPopUnder.so, but I could not find it elsewhere so that I can try it instead.
I see that the cmd line you put in this thread is:
samyGOso -A -B -l /mnt/opt/privateer/usr/libso/libUSBPopDown_30s.so,
whereas the cmd line in the default samygo 02_04_vusb.init is different (see below).
Thanks,
Peter
UE40H6470
T-MST14DEUC-2781.0 (downgraded from 2800.1 to 0000.0)
I have rooted it following this: https://forum.samygo.tv/viewtopic.php?f=70&t=9622
Code: Select all
# cat /mnt/etc/init.d/02_04_vusb.init | egrep -i 'libu|libso'
SO=libUSBPopDown_10s.so #disable usb popup for 10 sec
echo "injecting libUSBPopDown.so" >> $LOGFILE
# start libUSBPopDown (testing), later must be moved somewhere... where?Experimental.
samyGOso -p $INJPID -l $LIBSO_DIR/$SO & >> $LOGFILE 2>&1
# cat /dtv/USBPopDown.log
[USBPopDown] SamyGO E/F/H libUSBPopDown v0.2.1 - (c) zoelechat 2015
[USBPopDown] dlsym '_ZN9CMMDevApp17t_OnEndActivatingEmi' failed.
[USBPopDown] _ZN9CMMDevApp13t_OnActivatedEPKci [0x3a14df0].
[USBPopDown] lib_init, >>>
[USBPopDown] Hiding USB Popup Window!
[USBPopDown] Waiting 10 seconds...
[USBPopDown] Restoring USB Popup Window!
[USBPopDown] <<< lib_deinit
Re: [App] libUSBPopDown (E/F/)H (prevent startup vusb popup)
Don't use FW 0000.0 upgrade to any rooteable FW and then root.H Skype refueled root FW2130 or less.
UE48H6640 T-MST14DEUC 2781.0 root latestH --> 2130.0 skypeRoot-->0000-->2115.3 "Skype refueled" Root
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
Re: [App] libUSBPopDown (E/F/)H (prevent startup vusb popup)
Just to be clear with the fw versions of my TV...
The TV was initially on fw 2800.1. Then, I downgraded it to 0000.0. And then upgraded to 2781.0 and rooted.
Peter
The TV was initially on fw 2800.1. Then, I downgraded it to 0000.0. And then upgraded to 2781.0 and rooted.
Peter
Re: [App] libUSBPopDown (E/F/)H (prevent startup vusb popup)
Well, libUSBPopDown is innocent imho, it's not linked in any way to channel info. If you're absolutely sure it's the problem, simply don't use it
Otherwise libUSBPopUnder is at the bottom of 1st page.
Otherwise libUSBPopUnder is at the bottom of 1st page.
I do NOT receive any PM. Please use forum.
Re: [App] libUSBPopDown (E/F/)H (prevent startup vusb popup)
I tried libUSBPopUnder, but with the same result.
Of course, there is always the option of not using libUSBPop*, that I understand
I just wanted to ask if there is a way to troubleshoot it somehow, to improve it, should anybody else hit the issue too.
I know nothing about Samsung TV internal functions, etc, but if there is a log I can look into to see what is happening when I press the 'channel info' button, that will help a lot.
Of course, there is always the option of not using libUSBPop*, that I understand
I just wanted to ask if there is a way to troubleshoot it somehow, to improve it, should anybody else hit the issue too.
I know nothing about Samsung TV internal functions, etc, but if there is a log I can look into to see what is happening when I press the 'channel info' button, that will help a lot.
Re: [App] libUSBPopDown (E/F/)H (prevent startup vusb popup)
Issue fixed for me by downgrading to 2130.0 and then rooting using the "Skype refueled" method - viewtopic.php?f=70&t=10770