[App] More TV channels on E/F/H series
Re: [App] More TV channels on E/F/H series
Gf won't be mad anyway. You saved my ass.
Re: [App] More TV channels on E/F/H series
wluczykijwf wrote:Thanks you @gogo, and do this version works correctly on E-series?
I installed OnlineTV v. 1.1.10. (01.10.2016) , it works but i have a little problem when i change channel :
for exemple,
i see onlineTV channel
i change to channel DTV , no sound with image !
it's similar when i change channel DTV to onlineTV channel
this solution is MUTE on TV CONTROL and the sound is hearing .
Sorry for my english .
sorry for my english
TV SAMSUNG UE40ES5500 - T-MST10PDEUC_2007.0 - Firmware T-INFOLINK2012-1026) SamyGo ([App] Rooting E/F on latest firmwares) + OnlineTV
TV SAMSUNG UE40ES5500 - T-MST10PDEUC_2007.0 - Firmware T-INFOLINK2012-1026) SamyGo ([App] Rooting E/F on latest firmwares) + OnlineTV
-
- Official SamyGO Developer
- Posts: 1051
- Joined: Sat Sep 21, 2013 5:07 pm
- Location: Poland
Re: [App] More TV channels on E/F/H series
@olvec, I need your log file.
sorry for my english
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
-
- Official SamyGO Developer
- Posts: 1051
- Joined: Sat Sep 21, 2013 5:07 pm
- Location: Poland
Re: [App] More TV channels on E/F/H series
I added a approximate procentage TotalBufferSize value for pause and a aproximate calculate Total Download Stream. And I added new parameter SetInitialTimeOut to Settings.jsbobiturboto wrote:I have started thinking about calculation as well, because we have the total size and current bitrate.
But it will be tricky because without the current level of the buffer, we can't calculate it precisely.
I have found that explanation about the buffers, so 5 sec for initial 3 sec for pending and 10 in total should be ok.
The recommendation about pending buffer to be double of the initial, but have found it more stable if is less than that.
We can calculate it on demand to point the people what setting they should fill, and keep the info on green or yellow button, or inject it automatically
Using to test:
- Add what do not have to Settings.js script and modify value
Code: Select all
//For any type stream //If the Value < 1KB then set default Value //E.g. If you want to set 5MB then set the Value to 5120KB = 1024 * 5 Settings.SetTotalBufferSize_AllType = 1024 * 250; //It sets the total It sets the total It sets the total (KB) Settings.SetInitialBufferSize_AllType = 0; // It sets the initial buffered data size before start playback (KB) Settings.SetPendingBufferSize_AllType = 0; //It sets the minimum data size which goes out from buffering, when media player is on buffering status (KB) //If the Value < 1ms then set default Value Settings.SetInitialTimeOut_AllType = 0; //It sets the maximum time out value for initial buffering before starting playback (ms) //Individual for some type stream Settings.SetTotalBufferSize = { 'RADIO': 1024 * 1, 'HTTP-HD': 1024 * 50, }; Settings.SetInitialBufferSize = { 'RADIO': 128 * 1, 'HTTP-HD': 1024 * 12, }; Settings.SetPendingBufferSize = { 'RADIO': 128 * 1, 'HTTP-HD': 1024 * 12, }; Settings.SetInitialTimeOut = { 'RADIO': 30, 'HTTP-HD': 1000, };
- You can add new types (maybe HTTP-RADIO, MP3, HTTP-SD ect...)
- Modify type stream for channel HD in TvList.xml file
- Replace the Player.js, Display.js and Util.j scripts in mean directory OnlineTV
You do not have the required permissions to view the files attached to this post.
sorry for my english
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
-
- SamyGO Project Donor
- Posts: 489
- Joined: Sun Mar 23, 2014 8:15 pm
- Location: Bulgaria
Re: [App] More TV channels on E/F/H series
Thank you very much for the changes.
Very good it's working fine, I love to see how full is the buffer.
The problem is that always is increment.
I have got some buffering on one channel and then the total remains intact, it should be start from zero or the actual min value if we have buffering.
Which usually happening when the buffer is empty.
I didn't get what can check from the percentage during pause.
In general now I can watch channels which previously I couldn't.
One possible feature, please
Can we have the same behavior with next previous event (stroke left and right) like on yellow/green button, for the blue button (guide).
It will be great to check what will be the next event without switching the channel.
Very good it's working fine, I love to see how full is the buffer.
The problem is that always is increment.
I have got some buffering on one channel and then the total remains intact, it should be start from zero or the actual min value if we have buffering.
Which usually happening when the buffer is empty.
I didn't get what can check from the percentage during pause.
In general now I can watch channels which previously I couldn't.
One possible feature, please
Can we have the same behavior with next previous event (stroke left and right) like on yellow/green button, for the blue button (guide).
It will be great to check what will be the next event without switching the channel.
-
- Official SamyGO Developer
- Posts: 1051
- Joined: Sat Sep 21, 2013 5:07 pm
- Location: Poland
Re: [App] More TV channels on E/F/H series
I know. Sometimes when streaming is start then a mean download speed is very high.bobiturboto wrote: The problem is that always is increment.
I have got some buffering on one channel and then the total remains intact, it should be start from zero or the actual min value if we have buffering.
You press pause key and next yellow or green key. You can monitor the total buffer. If it is less of 100% then probably the stream doesn't broken after resuming.bobiturboto wrote:
I didn't get what can check from the percentage during pause.
bobiturboto wrote:In general now I can watch channels which previously I couldn't.
Yes, I have it in the plans.bobiturboto wrote:
One possible feature, please
Can we have the same behavior with next previous event (stroke left and right) like on yellow/green button, for the blue button (guide).
It will be great to check what will be the next event without switching the channel.
sorry for my english
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
-
- SamyGO Project Donor
- Posts: 489
- Joined: Sun Mar 23, 2014 8:15 pm
- Location: Bulgaria
Re: [App] More TV channels on E/F/H series
One more idea regarding of our webserver usage. We can create a mobile app which is browsing now on TV content and eventually to control Online TV app for switching the channels. Then we will have something absolutely complete. What you think about it?
Sent from my D6503 using Tapatalk
Sent from my D6503 using Tapatalk
-
- Official SamyGO Developer
- Posts: 1051
- Joined: Sat Sep 21, 2013 5:07 pm
- Location: Poland
Re: [App] More TV channels on E/F/H series
I need more description for your idea...bobiturboto wrote:One more idea regarding of our webserver usage. We can create a mobile app which is browsing now on TV content and eventually to control Online TV app for switching the channels. Then we will have something absolutely complete. What you think about it?
...but, I think that is now possible!
Just write a script which translates the address from your webserver to a link of stream for OnlineTV. Here is examples.
sorry for my english
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
-
- SamyGO Project Donor
- Posts: 489
- Joined: Sun Mar 23, 2014 8:15 pm
- Location: Bulgaria
Re: [App] More TV channels on E/F/H series
During the weekend I will try to create a few mockups
Now I have one different issue.
It seems it's very difficult to setup the pending buffer value with my crappy internet.
For that reason I have decided to remove the property and rely on the automatic value when is not present.
Unfortunately I have received error like this
Now I have one different issue.
It seems it's very difficult to setup the pending buffer value with my crappy internet.
For that reason I have decided to remove the property and rely on the automatic value when is not present.
Unfortunately I have received error like this
Code: Select all
[Player] Player video error: Cannot read property 'HTTP' of undefined, TypeError
[Player] Player deinit: 1
-
- Official SamyGO Developer
- Posts: 1051
- Joined: Sat Sep 21, 2013 5:07 pm
- Location: Poland
Re: [App] More TV channels on E/F/H series
@bobiturboto, Not remove You must set 0 value for the property.
sorry for my english
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500