Fixing SamyGO telnet/SSH/SCP/bash on C/D/E/F series

[OlliGo]

I read carefully through the thread, but a final solution for D was never posted. Last quote was from juusso:

yes, i saw these files on server, they slightly differ from files you`ve attached here
I haven`t succeed to merge your full patch with my Extensions, somewhere i still make mistakes. As result - still no benefits you mentioned. Yet.
We could merge all for each series, so no need to distribute separate fixes. Just re-install whole widget.

He doesn't stated which changes he did. So far I don't see where /dtv/network_opt needs to be mapped to. Also rcfix_telnetd cannot work as there is no telnetd on the D. And finally I don't see any line that would start the dropbear demon. As I have done that manually result was already discussed.

@All: Anyone who has it working on D and could provide more concrete steps for it?

[sectroyer]

1) No point in "starting dropbear demon" - Will NOT work until other stuff fixed
2) You should read all stuff and adjust it to your series. That's mine thing

[ZizaXXX]

Hello Gents,

I have UE46F8000 rooted with no problems. FTP and all apps working, however I cannot get telnet and SSH correctly working. Followed all instructions for F series in third post. Telnet is working with colours, but no executing history (i.e. if injecting, does not display "injecting...". SSH is not working at all with "CONNECTION REFUSED".

01_02_telnet.init:

Code: Select all

#!/mnt/bin/busybox sh
#
# ? Copyright 1996-2013, SamyGO
#
#
. /dtv/SGO.env

stop_bootloop()
{
# emergency skript exit to prevent boot loop
      for USB in ${1:- \
         /dtv/usb/sd* } ; do
         echo "checking $USB"
         sleep 1
         if [ -e $USB/STOP_TELNET ]; then
            "STOP_TELNET found. Script exit..."
            exit 1
         fi
      done
}

case $1 in 
	start)
	stop_bootloop # in testing phase. Just for protection.
#antishell, mount, console unlock, authuld exception, printk restrictions:
	insmod $MOD_DIR/kernel/drivers/pty/SRS_module.ko >> $LOGFILE 2>&1
	sync; sleep 1
		echo " " >> $LOGFILE 2>&1
		echo "++++++++++++++++++++++++++++++++++" >> $LOGFILE 2>&1
		echo "lsmod after insmod SRS_module.ko:" >> $LOGFILE 2>&1
		echo "++++++++++++++++++++++++++++++++++" >> $LOGFILE 2>&1
			lsmod   >> $LOGFILE 2>&1
		echo " " >> $LOGFILE 2>&1

#modules with dynamic addressing by bugficks:
	insmod $MOD_DIR/kernel/drivers/pty/ptys.ko >> $LOGFILE 2>&1 # alternative to pty.ko and devpts.ko from bugficks. Automatic mount of /dev/pts
	sync; sleep 2

# true telnet
   echo "export PS1='root@tv:\w \$ '" >> /mtd_rwarea/profile
   echo -e "ENV=/dtv/.ashrc\nexport ENV\n" >> /mtd_rwarea/profile
   echo "PS1='root@tv:\w \$ '" >> /mtd_rwarea/profile
   echo -e "ENV=/dtv/.ashrc\nexport ENV\n" >> /mtd_rwarea/profile
   /bin/mount -o bind "$SYSROOT/bin/sh" /bin/sh
   export HOME=/mnt/
   export PS1='root@tv:\w \$ '
   $SYSROOT/bin/busybox2 telnetd -p 23 -l $SYSROOT/bin/sh &  >> $LOGFILE 2>&1
	sync

#### E/F series: bind option is prohibited, you have to load proper mount.ko to use mount --bind.
	#mount our profile over original /etc/profile if mount.ko is loaded and mount issue fixed:
	$SYSROOT/bin/busybox mount -o bind /mtd_rwarea/profile /etc/profile || echo "can not mount profile!" && dmesg | tail >> $LOGFILE 2>&1

# mount our passwd file over original one (/bin/sh changed to /mnt/bin/sh )
   ln -s /mnt/bin/ /dtv/bin
      if [ ! -e /mtd_rwarea/passwd ]; then
                echo "root:saJvQKUdIxRW2:0:0:SamyGO secured Root:$HOME:/bin/sh" > /mtd_rwarea/passwd
        fi
	$SYSROOT/bin/busybox mount -o bind /mtd_rwarea/passwd /etc/passwd || echo "can not mount passwd" && dmesg | tail  >> $LOGFILE 2>&1
		echo " " >> $LOGFILE 2>&1
		echo "++++++++++++++++++++++++++++++++++" >> $LOGFILE 2>&1
		echo "checking mount --bind:"  >> $LOGFILE 2>&1
		echo "++++++++++++++++++++++++++++++++++" >> $LOGFILE 2>&1
	$SYSROOT/bin/busybox mount | grep "etc"  >> $LOGFILE 2>&1
                echo " " >> $LOGFILE 2>&1
                echo "++++++++++++++++++++++++++++++++++" >> $LOGFILE 2>&1
                echo "dmesg -c:"  >> $LOGFILE 2>&1
                echo "++++++++++++++++++++++++++++++++++" >> $LOGFILE 2>&1
			dmesg -c >> $LOGFILE 2>&1
                echo "++++++++++++++++++++++++++++++++++" >> $LOGFILE 2>&1
	;;
	stop)
	;;
	status)
	;;
	*)
	echo "Usage: $0 {start|stop|status}" 1>&2
	exit 0
	;;
esac

I am not an expert, so in case of support, can you please kindly post codes if you need me to do anything?

Many thanks in advance for your help.