Page 2 of 6
Re: [APP] Hyperion (Ambilight)
Posted: Sun Mar 10, 2019 3:10 pm
by bugficks
im using debian/linux 'standards'

anyways should be easily fixable if someone wants to.
im just an observer...
Re: [APP] Hyperion (Ambilight)
Posted: Tue Mar 12, 2019 7:34 am
by rakuri
So i repaired the symlinks for use with fat/ntfs system.
I also added an working config file and an init.
I only use hyperiond.sh with forwarder to send framebuffer to my external Hyperion-server.
Have fun.
Now im also just an observer...

Re: [APP] Hyperion (Ambilight)
Posted: Sun Mar 31, 2019 7:11 pm
by TheOfficialMrBlah
Hello,
After I tried a lot to install Hyperion on the TV and did not make it, I would like to know if there might be a guide or someone could help me.
Thanks a lot!
Re: [APP] Hyperion (Ambilight)
Posted: Mon Sep 13, 2021 8:21 am
by locarno
bugficks wrote: ↑Sun Mar 10, 2019 3:10 pm
im using debian/linux 'standards'

anyways should be easily fixable if someone wants to.
im just an observer...
Anyone know what happened to bugficks? He's still alive?
Re: [APP] Hyperion (Ambilight)
Posted: Tue Sep 14, 2021 12:51 pm
by sectroyer
locarno wrote: ↑Mon Sep 13, 2021 8:21 am
Anyone know what happened to bugficks?
Yes.
locarno wrote: ↑Mon Sep 13, 2021 8:21 am
He's still alive?
Yes

Re: [APP] Hyperion (Ambilight)
Posted: Sun Mar 19, 2023 11:35 pm
by brunogts77
rakuri wrote: ↑Tue Mar 12, 2019 7:34 am
So i repaired the symlinks for use with fat/ntfs system.
I also added an working config file and an init.
I only use hyperiond.sh with forwarder to send framebuffer to my external Hyperion-server.
Have fun.
Now im also just an observer...
Hello, i can t install hyperion on my tv, can anyone help me?
Code: Select all
+ case $1 in
+ /opt/storage/usb/sda1/SamyGO/hyperion/hyperiond.sh /opt/storage/usb/sda1/SamyGO/hyperion/etc/hyperion/hyp.samygo.json
ERROR: ld.so: object '/opt/storage/usb/sda1/SamyGO/hyperion/lib/arm-linux-gnueabi/libm.so.6' from LD_PRELOAD cannot be preloaded: ignored.
/opt/storage/usb/sda1/SamyGO/hyperion/usr/bin/hyperiond: error while loading shared libraries: /opt/storage/usb/sda1/SamyGO/hyperion/usr/lib/arm-linux-gnueabi/libQtGui.so.4: file too short
+ sleep 1
Re: [APP] Hyperion (Ambilight)
Posted: Thu Mar 23, 2023 7:55 pm
by Blaubaer2
Hello.
I'd like to try this Ambilight stuff but some info on how to install it and where the configs are would be helpful. I know he didn't say anything about support, but what's the point of the work he's done if no one else can use it? I'm not expecting a full guide but at least some pointers on the basics of getting it working. How to install it, for example, and where which settings have to be made so that it starts. Unless @bugfix wants to do it, I hope someone else will.
Re: [APP] Hyperion (Ambilight)
Posted: Thu Mar 23, 2023 11:48 pm
by brunogts77
Any help??? Please..,


Re: [APP] Hyperion (Ambilight)
Posted: Fri Mar 24, 2023 11:18 am
by Blaubaer2
rakuri wrote: ↑Tue Mar 12, 2019 7:34 am
So i repaired the symlinks for use with fat/ntfs system.
I also added an working config file and an init.
I only use hyperiond.sh with forwarder to send framebuffer to my external Hyperion-server.
Have fun.
Now im also just an observer...
Would you please share your knowledge with us? Just like you, I would like to use this too. Hyperiond reads the image on the TV and should either send it directly to the ESP(WLED) or to a Rasp Pi with HyperBian.
The problem is where which files have to be placed and where do I have to adapt something to my environment and hardware stuff.
Re: [APP] Hyperion (Ambilight)
Posted: Fri Mar 24, 2023 4:28 pm
by Blaubaer2
I think it's no help to find here from people who published it. They have been inactive on this forum for about three years. Hopefully still alive.
I think I've gotten a little further now.
Use FileZilla and put the hyperion.tgz in the Samygo folder on the stick.
Then use putty and unpack it with the following command.
Now all files should be in the right place.
The next step will be to start it correctly and find out the right configuration to use it.