Page 2 of 2
Re: BD-D8900 debug console
Posted: Thu Mar 22, 2012 7:36 pm
by oga83
The sata signals are directly connected to the ARM processor :
Difficult to see exactly where because of the heatsink.
I'm afraid the ARM is a BGA; Moreover, the pcb is a multilayer one; It will not be easy to locate a via on which you could make the connections
[Edit] Sata signals are marked in red
Top Layer :
Bottom Layer :
Re: BD-D8900 debug console
Posted: Mon Apr 09, 2012 2:03 pm
by williamsmith518
The magic codes 20102011 and 20089999 work fine, but I was not able to find any 'shell' command in the menu.
Is it available for the BD-C8900 ?
[Edit] My firmware is 1007_275. In the boot log, I can see some FIRHRDEUC, but no FIRURDEUC as listed in the compatibility list.
-----------------------------------------------
Patent tescili
Re: BD-D8900 debug console
Posted: Mon Apr 09, 2012 2:22 pm
by oga83
No, there is no shell command on the debug console
Re: BD-D8900 debug console
Posted: Wed Jun 26, 2013 7:05 pm
by torpebaun
@oga83: Why is there no shell command on the debug console?
Re: BD-D8900 debug console
Posted: Thu Jun 27, 2013 8:04 am
by oga83
It is explained somewhere, but I can't find where.
So here it is again :
Go to Platform print settings : 2, 0, 0
Go to Advanced platform : 2
Go to DeviceManager debug : 2
Go to DeviceManager MW debug : 90
Go to Sell : 88
Code: Select all
DBG> : 0x88
VDLinux#>
VDLinux#> ls
BD_JAVA MicomUpgradeForce hdd_makefs.sh
Cert MusicDBCopy hdd_partition.img
Comp_LIB PhotoBrowser hdd_partition.txt
DeviceUpgrade ReleaseInfo info
EDID SESK_S lib
EXE_IMG_VER SESK_T2C memalloc
FWDownload SESK_T2C_NORDIG mkfs
Factory_Part1.dat SESK_TC partition.txt
Of course, you need a hex-unlocked kernel to use it...