[ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)

[ssidquest]

Upon reading the debug logs through the console, I saw that UEP is blocking the busybox and the libSkype.so
How do I fix this?

I saw in the F-series, there is a UEP killer script. Do we also have it here in the series H rooting script?

[ssidquest]

Okay I re-ran the widget. After getting telnet on 3123, I ran "/bin/busybox top" just to observe. After a while, I saw these in the debug console:
http://ctrlv.it/id/4423/4085050833

Then I was able to connect through SSH. I ran netstat and saw that ports 21, 22, 23 are now up! So happy with that progress.

Then I reboot the TV. Gone again. Why is that?

[ssidquest]

Okay here's my observation after I lost root from last reboot.

1. I re-ran the SamyGO widget again to gain remote access through 3123.
2. I saw the UEP blocking so it was my signal that 3123 is now listening.
3. I ran "/bin/busybox top". Immediately, I saw in the console this: http://ctrlv.it/id/4423/4085050833
4. Full root again.
5. (I guess) I would lose it again if I reboot.

Here are the logs from /mnt:
sam.log
http://ctrlv.it/id/4425/1199811956

samygo.log
http://ctrlv.it/id/4426/4261021624


UPDATE: I lost root again upon reboot

[sectroyer]

I asked for PHOTO
Also I need insmod_bcm.sh

P.S. your antysfd.ko is NOW GOOD. MAKE A COPY!!!. No need to run patch.bat anymore

[ssidquest]

Photo

SpoilerShow

insmod_bcm.sh

Code: Select all

echo " /mtd_rwarea/network/insmod_bcm.sh begin"
insmod /lib/modules/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/BRCM/bcm_dbus.ko
insmod /mtd_cmmlib/WIFI_LIB/BRCM/wl.ko init_ccode="XR/57"
echo " /mtd_rwarea/network/insmod_bcm.sh end"

Still losing root after reboot. It does not run the script automatically to gain root access.

PS: the rooting usb is always connected during reboot.

Update:
When full root is not running, TV would perform nicely.
When I ran the SamyGO script to gain full root, TV would crash after around 5 minutes or so.

[sectroyer]

Okay I thought we have this figured but let's repeat

Still losing root after reboot. It does not run the script automatically to gain root access.

Until we finish do NOT expect ANYTHING except port 3123 to be working

Update:
When full root is not running, TV would perform nicely.
When I ran the SamyGO script to gain full root, TV would crash after around 5 minutes or so.

Until we finish do NOT expect ANYTHING except port 3123 to be working

Hope this helps

[ssidquest]

Okay, what would be the next step?

Thanks!

[sectroyer]

Okay, what would be the next step?

Please download InstallSamyGO-H from first post, rename data_bcm_xr57.zip -> data_bcm.zip and re-root (no need to run patch.bat, skip this part).

[ssidquest]

Okay, what would be the next step?

Please download InstallSamyGO-H from first post, rename data_bcm_xr57.zip -> data_bcm.zip and re-root (no need to run patch.bat, skip this part).

Should I just overwrite the files currently in the USB? Or format it before putting the SamyGO files?

[sectroyer]

no format. Simply unpack this one file and change