#!/bin/sh
#
# ? Copyright 1996-2010, ZsoltTech.Com
# by Ser Lev Arris <
arris@ZsoltTech.Com>
#
# donated for the SamyGo Project
#
http://samygo.sourceforge.net/
#
# Version: SamyGO svn $Id: 04_04_samba.init 1069 2011-01-03 16:47:24Z arris69 $
#
. /dtv/SGO.env
# sleep 9
##### CHANGE MEEEEE !!!!! ######
USER="dusf's-actual-samba-server-username" #"CHANGE_MEEEEE" #user and password have to be st to SOMETHING
PASSWD="dusf's-actual-samba-server-password" #"CHANGE_MEEEEE"
PERM="rw" # can be ro or rw
##### CHANGE MEEEEE END ######
DEST_DIR=$MOUNT_PATH/dtv/usb/sda1
SERVER="192.168.1.1"
# SERVER="10.0.0.1" # if you want a fixed server
SHARES="NAS/Media"
FR_NAME="Samba Server"
# M_OPTS="rw,user=${USER},password=${PASSWD}"
#M_OPTS="$PERM,uid=1010,gid=1010,user=${USER},password=${PASSWD},codepage=cp1250,iocharset=utf8"
M_OPTS="$PERM,uid=1010,gid=1010,user=${USER},password=${PASSWD},iocharset=utf8,noserverino"
NO_PASSWORD_OPTS="$PERM,sec=ntlm,user=,uid=1010,gid=1010,password=,iocharset=utf8,noserverino"
[ -e /mtd_rwarea/smb_userdata ] && source /mtd_rwarea/smb_userdata
# Removing. Now we support no password scenario
# if there is a password mounting will fail anyway
#[ -z $USER ] && exit 1
#[ -z $PASSWD ] && exit 1
SERVERS="Don't set me!!"
do_mount()
{
# $(echo -e "[sdh]\nVendor : CifsMount\nProduct : $FR_NAME\n\
#Serial : Q80VQLFH\nDevpath : 8\nLun : 0\nMountDir : $DEST_DIR\nFileSystem : vfat\n" >> /dtv/usb/log)
for i in $S_MOUNTS ; do
i="$(echo -n $i | sed -e 's/SGOspace/ /g')"
#M_POINT="$DEST_DIR/$1/$(echo -n $i | sed -e "s/\//_/g")" #disabled by levi
M_POINT="$DEST_DIR/$1/$(basename $i)" #enabled by levi
mkdir -p "$M_POINT"
if [ `cat /proc/mounts | grep -c "$M_POINT"` -lt "1" ]
then
echo "Trying to mount WITH password!"
$SYSROOT/bin/busybox mount -o "${M_OPTS}" -t cifs "//$1/$i" "$M_POINT"
if [ `cat /proc/mounts | grep -c "$M_POINT"` -lt "1" ]
then
echo "Trying to mount WITHOUT password!"
$SYSROOT/bin/busybox2 mount -o "${NO_PASSWORD_OPTS}" -t cifs "//$1/$i" "$M_POINT"
fi
else
echo "$M_POINT is mounted!"
fi
done
}
get_shares()
{
if [ -z "$SHARES" ] ; then
echo "Search Shares"
for i in $SERVERS ; do
echo "on: $i"
S_MOUNTS=$(smbclient -s "$SYSROOT/etc/samba/smb.conf" -U ${USER}%${PASSWD} \
-g -L $i | grep "Disk|" | grep -v "\\$" | grep -v " Service" | sed -r 's/.*\|(.*)\|.*/\1/' | sed -r 's/ /SGOspace/g')
# -g -L $i | grep "Disk|" | grep -v "\\$" | grep -v " Service" | cut -d "|" -f2)
[ -n "$S_MOUNTS" ] && do_mount $i
done
else
echo -n "Fixed Server: "
for i in $SERVERS ; do
echo $i
S_MOUNTS=$SHARES
[ -n "$S_MOUNTS" ] && do_mount $i
done
fi
}
get_servers()
{
if [ -z "$SERVER" ] ; then
# SERVERS=$(cat /proc/net/arp | grep -v "IP address" | cut -d " " -f1)
SERVERS=$(cat /proc/net/arp | grep -v "IP address" | sed 's/^\(\w*.\w*.\w*.\w*\) *.*/\1/')
else
SERVERS=$SERVER
fi
}
case $1 in
start)
echo " " >> $LOGFILE 2>&1
echo "+++++++++++++++++ SAMBA ++++++++++++++++" >> $LOGFILE 2>&1
echo " " >> $LOGFILE 2>&1
insmod $MOD_DIR/kernel/fs/cifs/cifs.ko || dmesg | tail >> $LOGFILE 2>&1
sync; sleep 2
mkdir -p "$DEST_DIR"
get_servers
get_shares
;;
stop)
# may can fail if device access the mount from content library
# for i in $(cat /proc/mounts | grep cifs | cut -d " " -f2) ; do
for i in $(cat /proc/mounts | grep cifs | grep "$DEST_DIR" | sed 's/^\(.*\) \(.*\) cifs .*/\2/') ; do
i="$(echo -n $i | sed -r 's/\\040/ /g')"
$SYSROOT/bin/busybox umount "$i"
done
;;
status)
$SYSROOT/bin/busybox mount | grep "$DEST_DIR"
;;
*)
echo "Usage: $0 {start|stop}" 1>&2
exit 0
;;
esac
