Menu->System->General->Quickly Power OFF Samsung - this option must be OFFatilla wrote:now i have only STEP 1-2 OK the other is NO ... what can i do 2130 MST ??
Was just my 2 cents, told you it's up to you.mihd wrote:I understand you.
But it is much more convenient to do it with a computer, and not to go with the stick from the TV to the PC and vice versa.
Before I lay out an updated version, I wanted to ask a few questions.zoelechat wrote:.
Why not simply rebooting a TV?mihd wrote: For NON-MST do this:
Should work for T-GFS and some old T-GFP firmwares.
- Install SamyGO widget as described in MST section (steps 1-4)
- Do not power off TV. Set scheduled power on (use most close schedule as possible)
- Power off TV and wait for TV power on
I have no this men?... H6470 fw 2130 mstmihd wrote:Menu->System->General->Quickly Power OFF Samsung - this option must be OFFatilla wrote:now i have only STEP 1-2 OK the other is NO ... what can i do 2130 MST ??
Menu->System->General->Samsung Instant ON - this option must be OFF
When i plug the cable from socket the light goes offNext - press "power" button on the remote until the light goes out at the front of the TV.
Insert the plug into the socket, power on the TV
muss i push power twice?? And when i plug the cable tv start immedialityAsk Samsung T-GFS users reported NO ROOT till one tried "scheduled power on"mihd wrote:Why not simply rebooting a TV?mihd wrote: For NON-MST do this:
Should work for T-GFS and some old T-GFP firmwares.
- Install SamyGO widget as described in MST section (steps 1-4)
- Do not power off TV. Set scheduled power on (use most close schedule as possible)
- Power off TV and wait for TV power on
After that all have root 8. If your TV reboots do nothing but if it crashes unplug the power cable (from instruction).FilipeAmadeuO wrote: On the first try the tv freezed (it won't respond to remote control).
I will set 3 seconds in the updated version.FilipeAmadeuO wrote: - STOP_SAMYGO Works ok (but not in all usb ports. Only worked properly on the USB HDD port. Probably there is a order in which the TV checks the usb ports and maybe 1 seconds is not enough to check all ports)
OK. Maybe add to the instruction a sugestion to use the HDD USB Port on STOP_SAMYGO.mihd wrote:I will set 3 seconds in the updated version.FilipeAmadeuO wrote: - STOP_SAMYGO Works ok (but not in all usb ports. Only worked properly on the USB HDD port. Probably there is a order in which the TV checks the usb ports and maybe 1 seconds is not enough to check all ports)
"sleep" must be set before the cycle. Because STOP_SAMYGO search begins before the USB definition by TV.FilipeAmadeuO wrote: OK. Maybe add to the instruction a sugestion to use the HDD USB Port on STOP_SAMYGO.
Adding 2 more seconds will also make the boot slower, but further testing is necessary.
I will remove repeated installation of busybox, telnet on port 33.FilipeAmadeuO wrote: Any more improvements planned ? Any idea to make the root faster ?
Try this version. It is not work. It is for test!!!atilla wrote: I have no this men?... H6470 fw 2130 mst
Code: Select all
ls /dtv
ls /tmp
ls /tmp/bin
ls /mtd_rwcommon/widgets/user/SamyGO/data