Page 128 of 157

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Jul 22, 2016 1:33 pm
by tompl
There is no Firmware 0000 for T-GFP9DEUC well i can't find one :/

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Jul 22, 2016 2:02 pm
by zoelechat
Nope, you can only hope for future "root on *very* latest firmwares". Meanwhile, don't forget to disable updates...

Re: [!!!] Rooting H on latest firmwares

Posted: Fri Jul 22, 2016 2:04 pm
by tompl
Thanks for letting me know. I have disabled updates on the router as there is no option to turn it off in the service menu.

Re: [!!!] Rooting H on latest firmwares

Posted: Sun Jul 24, 2016 6:48 pm
by JeppeTh
It seems bluray firmware is named B-FB4HRDEUC, not really mentioned but I guess it may work anyhow then...

Some questions.
1. Is the rooting methods as safe as e.g. rooting method for f-series bluray? I.e. just remove USB when turned off and rooting is gone?
2. Is the "new skype" method the preferred rooting method? Or should I try the method in this thread?
3. The method in this thread requires wifi. Is that only while rooting? I.e is it possible to switch to LAN after root is enabled?
EDIT: realized there's a lan switch patch...

Re: [!!!] Rooting H on latest firmwares

Posted: Mon Jul 25, 2016 10:29 pm
by JeppeTh
I made it a try on my BD-H8900n (B-FB4HRDEUC according to samsung.com), but it failed.
Can you see why?
20160725_231350.jpg
SpoilerShow
nsmod_qca.sh

Code: Select all

echo " insmod_qca.sh begin"
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x37
echo " insmod_qca.sh end"
SpoilerShow
.cm0013

Code: Select all

CM_DEV_ID|1469480782
SpoilerShow
network_type_info.txt

Code: Select all

CurrentType=1
EDIT: And yes - I'm using wifi - forgot to switch to wireless at the first try though...

Re: [!!!] Rooting H on latest firmwares

Posted: Tue Jul 26, 2016 1:48 am
by sectroyer
Yeah, all looks okay. Your Bluray IS rootable with newest (still WIP) rooting technique just will not work with the one you just tried because you did NOT block updates "on time". Now you should block them IMMEDIATELY, confirm blockade is working and wait for release which will work for you without ANY problems :) If you don't block you will NEVER get root working :)

P.S. You should also disable updates in normal menu :)

Re: [!!!] Rooting H on latest firmwares

Posted: Tue Jul 26, 2016 7:16 am
by JeppeTh
Ok, thx. Any idea of when that "technique" will be "released"?

My attempts didn't leave any "harmful stuff" on the device right?

Is there any idea to try the "new skype" variant on this device? EDIT: Seems too much stuff not available on my bluray for trying that out.

Re: [!!!] Rooting H on latest firmwares

Posted: Tue Jul 26, 2016 11:25 pm
by sectroyer
Everything is okay, nothing "harmfull" left on TV :)

help to root my H6270, please

Posted: Tue Aug 09, 2016 6:45 pm
by sebausmd
i followed the root steps ([!!!] Rooting H on latest firmwares), but i get some problems...
I`m on T_MST14DEUC-2740.6 firmware...


8. Press enter when you're asked, the widget will automatically finish installation then.
9. When it finishes it will ask to reboot TV.

when i press "ENTER" key,
SpoilerShow
IMAG1048.jpg



step 9 will run in a error and will not reboot...
i get error i should read root guide (please see picture in spoiler) , but i can`t find my mistake :(
also, i`m i little bit consused about Skype or not and what about the engine is in InstallSamyGO-H folder?!?

anyone can help me, please?

sorry, i must change the status... as not solved :(
i don`t know is my tv sucessfully rooted? - Telnet is NOT running... (port 3123) maybe can i repeat the procedure? (or i get a brick???) (reference see picture in spoiler...)
help me, please; one posts later i descripe my problem at step 12. THX

Re: [!!!] Rooting H on latest firmwares

Posted: Tue Aug 09, 2016 7:23 pm
by sebausmd
09. When it finishes it will ask to reboot TV. - I have done this
10. Reboot TV and wait 5 minutes. - I have wait... min 8 minutes...
11. Power OFF TV and UNPLUG USB. - ...
12. On PC check USB. You should see following files:

insmod_qca.sh OR insmod_bcm.sh - nothing to see / find :(
network_type_info.txt - nothing to see / find :(
wifi_vendor.txt - nothing to see / find :(
SamyGO/vermagic.txt (in some cases you might NOT see this file but if root is working do NOT worry)

Sorry, i need your help, please
TELNET (IP-adress for TV):3123 also NOT Work