SamyGO

TOMillr wrote:Just to provide some feedback: Was able to root the latest firmware 2107.1 on a multiple UExxF6xxx series tvs.

You should disable OTN Support!!!

sectroyer wrote:You should disable OTN Support!!!

You guys should be happy to get feedback like that.

Just to ease your mind about the OTN thing: I've got two identical tvs around the house and I only really need to have SamyGo working on the device in the living room. That makes the one in the bedroom somewhat like my "spare" testing device.

Hi everyone,

Today I've spent few hours truing to root my UA40F6400 with T-MST12UABC-2131.0, BT-S/G firmware all to no avail.
OTN is turned off, network connected by wire.
Tried replacing data.zip - same story.
After replacing run.sh there's no sam.log created in SamyGO_data.
My guess it's the firmware version, as I couldn't find any successful references to version greater 2107.

Screenshot attached.
Does anyone has any clues where to look and what to try ?
I've got plenty of time and I really need this root, so if anyone can help with advises what to try, I'll do it and post the results back.
Hopefully together we can make root working on later firmwares.

Did you disable OTN Support ASAP?

Yes, I did it.
I've got this TV with 2131 firmware and disabled OTN, so it won't update any further than this.
However with 2131 root seems not to work

TOMillr wrote:Just to provide some feedback: Was able to root the latest firmware 2107.1 on a multiple UExxF6xxx series tvs.

Thnx!
I was looking for such feedback

sectroyer wrote:If you had /dtv/SamyGO_OK' -> YES it measn rooting worked and the problem was ONLY with your USB or you used WiFi You should get back to that situation And check telnet on port 5023

What do you mean with Wi-Fi?
I'm experiencing some issues and I'm using Wi-Fi, are there any issues if the tv is connected through Wi-Fi?

axel17 wrote: I'm experiencing some issues and I'm using Wi-Fi, are there any issues if the tv is connected through Wi-Fi?

Was this:

sectroyer wrote:

!	WARNING!!!! DON'T ASK FOR HELP WITHOUT ROOTING USING LAN CONNECTION!!!!!!! NO WIFI SUPPORT!!!!

in first post too little?

One question. Is there any way to copy all the data from the FAT USB directly to the TV in order not to use any FAT USB pen drive ?
My Tv only has 2 USB ports so one port is always occupied...

FilipeAmadeuO wrote:One question. Is there any way to copy all the data from the FAT USB directly to the TV in order not to use any FAT USB pen drive ?

Yes it's possible and NOT supported:) Anybody can do it on their own risk and no support/instructions will be provided since it makes brick risk higher