SamyGO

Hello,

Now samygo and samba working only when USB is plugged in this TV.
I would like to install samygo pernamently at TV memory (USB with samyext4.img should not be plugged a TV).
Next question if your link is correct for me - what should I do to work corerctly samba without USB?
Setup samba and virtual USB or ???

Thank you for your support.
Jurek.

sectroyer wrote:

MysticQc wrote: No way to downgrade?

Not without 0000 fw or root.

MysticQc wrote:Any JTAG plan somewhere?

You probably have ExLink but that won't help you...

Sectroyer, thank you for accurate answer.
MysticQc.

I am saying same thing for months BLOCK UPDATES that's the most important thing!!!! Everybody who will do it and listen to me WILL have root. Without it no point talking more

@sectroyer
I need your help. I have a friend Samsung UE50H5203 with firmware T-NT14MDEUC 1149.1.
The problem is that the TV only have external wifi (with Samsung dongle) and one USB port.
So i have not been sucessfull using the network root and also there is no [FW 0000] for this TV.
Do you have any sugestion ?
Thanks

I think something like TP-Link TL-MR3020 or similar could be a solution for your situation....

momchetoi wrote:I think something like TP-Link TL-MR3020 or similar could be a solution for your situation....

The problem is that the network root is based on wifi...

Have you tried to root and than to use this solution viewtopic.php?f=70&t=9692 ?

momchetoi wrote:Have you tried to root and than to use this solution viewtopic.php?f=70&t=9692 ?

Tried but not sucessfull (to root)...

Sorry, no idea than. But would suggest you to post some pictures from your trial root procedure...

Hello.
I have a lot of problems)) I do not even know where to start))
The first thing I do is to work through an interpreter, as I have poor English.

Well Well traveled.
I have a samsung UE40H6500,I rolled up to 0000, then he rose to 2781.0
I did everything as it is written in as root to the instructions that are written on the first page of the forum. Without skype.
I am becoming a net stick and wrote on it through the REC further turning off the TV, and set the USB flash drive which is FAT32 folders "InstallSamyGO-H" "SamyGO". In the folder "SamyGO" also put the file "samyext4.img" Turned on the stick and turned on the TV launched in Smart Hub, InstallSamyGO-H.
The first is that he gave: Then press enter: I reboot and wait 5 minutes? then I turned over and put the USB flash drive to the computer. Create a file in the root. Here they are: Launched patch.bat, he waited, he gave me this: What do I do next, connect the USB flash drive and turn on the TV, wait 5 minutes, and there is no niche, 21,22,23,3023,3123 ports are closed.
Check out this fact that the scanned ports on the Advanced Port Scanner: What problem do not even know myself a novice here.

But there is something else !, I'm doing? I run back through the Smart Hub "InstallSamyGO-H" restart, wait 5 minutes, and there's this: open ports 21,22,23,33,1080,3023,3123,7676,8000,8001,8443.
Everything is working. FTP and TELNET works.
If you reboot again, then again, all ports are closed.
What's the matter? How do I do to make it work as it should? Help me please. Sorry if I do a lot of text written. Because I do not know where I describe my problem.