[ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)

[m0thman]

Thank's for the reply dar3k. I'll try it.
Can somebody send me md5 hashes for these files?

Mine are:

Code: Select all

MD5 (samyext4.img) = 26125ed8103a55e09c0aab82ed6a1129
MD5 (busybox) = d6cab1175626f10fc9ff03b6e84e9ea9

[m0thman]

SpoilerShow

Ok, I've downgraded my UE55HU8500TXRU to FW to version T-GFP8DEUC 2270.3
Now it's better, but still does not work.
I've tried to do that with and without 2nd timeshift flash.
Watchdog is disabled.

Check your pendrive, at first redownload samyext4.img because you have problem with that file:
"/dtv/usb/sda1/SamyGO/run1.sh: line 48: can't create /mnt/sam.log: Read-only file system"
Check also that file on your USB stick /SamyGO/busybox

In any case I think that there should be something else. I've re-downloaded all archives and checked md5 of files you mentioned — they are the same.

[dar3k]

Try with another pendrive because

There script has copied file into /dtv
+ cp /dtv/usb/sda1/SamyGO/samygo_telnetd /dtv/

Here that file doesn't exsist:
/dtv/usb/sda1/SamyGO/run1.sh: line 22: /dtv/samygo_telnetd: not found
and this is something unnormal, you are sure your pendrive is FAT32?

Change pendrive and try once again from first step
remeber

SpoilerShow

Menu->System->General->Quickly Power OFF Samsung - this option must be OFF
Menu->System->General->Samsung Instant ON - this option must be OFF

[m0thman]

...
remeber

SpoilerShow

Menu->System->General->Quickly Power OFF Samsung - this option must be OFF
Menu->System->General->Samsung Instant ON - this option must be OFF

"Quickly Power OFF Samsung" is not present. "Samsung Instant ON" is disabled.

Ok, will try another pendrive. But I suspect those "Terminated" messages. Looks like commands are not performed. When I've login with telnet after first reboot I was not able to run any command. Even "ls" where closed with this "Terminated" message.
I think that the main reason is:

Code: Select all

insmod: can't insert '/tmp/antysfd.ko': invalid module format

[m0thman]

Just to be sure:

10. Reboot TV and wait 5 minutes. => Here I've switched tv OFF by my remote and then switched it ON.
11. Power OFF TV and UNPLUG USB. => Here I've switched tv OFF by my remote.

I'm not required to unplug TV's power cord for both cases. Is that correct?

[dar3k]

Just to be sure:

10. Reboot TV and wait 5 minutes. => Here I've switched tv OFF by my remote and then switched it ON.
11. Power OFF TV and UNPLUG USB. => Here I've switched tv OFF by my remote.

I'm not required to unplug TV's power cord for both cases. Is that correct?

Try with disconnect power cable and push power button on RC until red led will down. And than connect again (some models have software off)

[sectroyer]

Ok, I've downgraded my UE55HU8500TXRU to FW to version T-GFP8DEUC 2270.3
Now it's better, but still does not work.
I've tried to do that with and without 2nd timeshift flash.
Watchdog is disabled.

You are constantly using NOT patched version of antysfd.ko. No idea why, but log clearly shows you do

[yourhomerouter]

I try to rot my TV with new metod.
i downgrade from 28xx to 0000
upgrade firmware to 2130 ( i want to root with skype metod..but cant find skype to install)
i do everything step by step by tutorial...
and now my smart pilot dont work, and TV hangs on the menu...
Please tell mi what is wrong, and how to fix it
sam.log:

Code: Select all

https://ctrlv.it/id/17906/1532923844

samygo.log

Code: Select all

https://ctrlv.it/id/17907/1993371587

this is my secound tv H series, first work perfect...

thanks for your work


edit...

[m0thman]

As far as I understand this happens because SamyGO starts only first time after reboot. Then it fails with this:

Code: Select all

insmod: can't insert '/tmp/antysfd.ko': invalid module format

And does not even tries to start after applying patch.
What can cause this error?

[m0thman]

I've tried to perform rooting process using already patched antysfd.ko
It runs and I'm even able to access TV by ssh. But it does not start after 2nd reboot. It only starts after first reboot when rooting is performed.

Also when using patched antysfd.ko, vermagic.txt is not created.

Here is sam.log: (other files are the same as in previous posts)

sam.logShow

Code: Select all

+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sda1/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sda1/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
+ [ 0 -ne 0 ]
+ /bin/dmesg
+ /bin/busybox grep anty
 [antysfd] loaded
 [antysfd] security_ops: 0xc03c1af0
 [antysfd] sfd_mmap_file_hook: 0xbe4a78c8
 [antysfd] close: 0xc00c9180
 [antysfd] open: 0xbe4a6cc8
 [antysfd] Starting sfd_uep_check_elf_file search at: 0xbe4a6cc8
 [antysfd] found DMB SY at: 0xbe4a781c
 [antysfd] branch sfd_uep_check_elf_file: 0xbe4a7834
 [antysfd] sfd_uep_check_elf_file: 0xbe49d384
 [antysfd] Patching sfd.ko successful!!!
antysfd mod ld
+ chmod +x /tmp/ntkfree
+ mknod /dtv/ntkaxis c 140 0
+ /tmp/ntkfree
open failed
+ cp /dtv/usb/sda1/SamyGO/samyGOso /tmp/
cp: can't stat '/dtv/usb/sda1/SamyGO/samyGOso': No such file or directory
+ cp /dtv/usb/sda1/SamyGO/libNetSwitch.so /tmp/
cp: can't stat '/dtv/usb/sda1/SamyGO/libNetSwitch.so': No such file or directory
+ chmod +x /tmp/samyGOso
chmod: /tmp/samyGOso: No such file or directory
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sda1/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sda1
checking /dtv/usb/sda1
+ /bin/sleep 1
+ [ -e /dtv/usb/sda1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
+ cp /dtv/usb/sda1/SamyGO/samygo_telnetd /dtv/
+ chmod +x /dtv/samygo_telnetd
+ cp /dtv/usb/sda1/SamyGO/busybox /tmp/bin/+
/dtv/samygo_telnetd 33
Starting simple telnet server
Socket created
bind done
Waiting for incoming connections...
+ chmod +x /tmp/bin/busybox
+ /tmp/bin/busybox --install -s /tmp/bin
+ sync
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
tcpsvd: listening on 0.0.0.0:21, starting
+ ln -s /dev/loop3 /tmp/loopnone
+ sync
+ [ -e /dtv/usb/sda1/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
+ /tmp/bin/busybox --install -s /mnt/bin
+ sync
+ rm /mnt/sam.log
rm: can't remove '/mnt/sam.log': No such file or directory
+ ls -la /mnt/bin /mnt/doc /mnt/etc /mnt/firmware /mnt/lib /mnt/lost+found /mnt/mc /mnt/opt /mnt/rcSGO /mnt/sbin /mnt/src /mnt/usr /mnt/var
+ echo ===========================
+ echo Starting rcSGO from run1.sh
+ echo ===========================
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt
tcpsvd: start 4064 192.168.1.39:21-192.168.1.224:53725
tcpsvd: status 1/30
tcpsvd: end 4064 exit 1
tcpsvd: status 0/30
Connection accepted
running shell
IO thread started
Error reading
shell exited