SamyGO

Hello

( sry for my bad english)

my TV = UE 46 F 6510

software = T-MST12DEUC-2110.1

i try it with the instructions, but it doesn't work on my TV.
i have the same problem ( picture )
ftp with fillezilla dosnt work with the IP from the TV

It DOES work on your TV and it even works great Your problem is either bad samyext4.img or you are using Wi-Fi/WLAN

sectroyer wrote:It DOES work on your TV and it even works great Your problem is either bad samyext4.img or you are using Wi-Fi/WLAN

i have also tested it with LAN and the samyext4.img file i have from the first site downloaded ..where i can become a good file when this one is not good

well you should post the image from the LAN try. Also you should try debug SamyGO_data Everything explained in first post Just instead of reading you decided to simply NOT try

sectroyer wrote:well you should post the image from the LAN try. Also you should try debug SamyGO_data Everything explained in first post Just instead of reading you decided to simply NOT try

I do not sheep, did everything as Introduction. created folder SamyGO_data.zip from SamyGO.zip file samyext4.img, run.sh, run1.sh, data.zip desired term.
SamyGO-F-SM-MST-Fix USB pasted on USB
USB to TV smatrhub, instaliert Folder SamyGO-F-SM-MST-Fix
get the following screen television off and on again does not happen next
FTP connection unsuccessful (user, pass ??

mazda6 wrote:

sectroyer wrote:well you should post the image from the LAN try. Also you should try debug SamyGO_data Everything explained in first post Just instead of reading you decided to simply NOT try

I do not sheep, did everything as Introduction. created folder SamyGO_data.zip from SamyGO.zip file samyext4.img, run.sh, run1.sh, data.zip desired term.
SamyGO-F-SM-MST-Fix USB pasted on USB
USB to TV smatrhub, instaliert Folder SamyGO-F-SM-MST-Fix
get the following screen television off and on again does not happen next
FTP connection unsuccessful (user, pass ??

See red NO in /dtv/SamyGO. You need to reroot and switch to cable. Also you did NOT do everything as explained in first post. Last point of instruction says:

In case of issues:
SPOILER: SHOW

It doesn't look you did read it

sectroyer wrote:

mazda6 wrote:

sectroyer wrote:well you should post the image from the LAN try. Also you should try debug SamyGO_data Everything explained in first post Just instead of reading you decided to simply NOT try

I do not sheep, did everything as Introduction. created folder SamyGO_data.zip from SamyGO.zip file samyext4.img, run.sh, run1.sh, data.zip desired term.
SamyGO-F-SM-MST-Fix USB pasted on USB
USB to TV smatrhub, instaliert Folder SamyGO-F-SM-MST-Fix
get the following screen television off and on again does not happen next
FTP connection unsuccessful (user, pass ??

See red NO in /dtv/SamyGO. You need to reroot and switch to cable. Also you did NOT do everything as explained in first post. Last point of instruction says:

In case of issues:
SPOILER: SHOW

It doesn't look you did read it

and again i have no conection with ftp do i need user/password?

mazda6 wrote: and again i have no conection with ftp do i need user/password?

No you do NOT need user/password. But you DO need to follow directions. Now your log looks better I am still not sure you are using LAN or Wi-Fi... Also please use debug SamyGO_Data etc. to get log

sectroyer wrote:

mazda6 wrote: and again i have no conection with ftp do i need user/password?

No you do NOT need user/password. But you DO need to follow directions. Now your log looks better I am still not sure you are using LAN or Wi-Fi... Also please use debug SamyGO_Data etc. to get log

what should happen when the dasa TV turn off and on again, the widget automatically starters, dobijemli a message on the screen

thanks

mazda6 wrote: what should happen when the dasa TV turn off and on again, the widget automatically starters, dobijemli a message on the screen

thanks

Well users should read first post and use Debug SamyGO_data but they don't. Also users should NOT use Wi-Fi